[1] PARKAR Z,MANGUN CH. Ablation characteristics of an aromatic thermosetting copolyester/carbon fiber composite[J]. J. Composite Mater.,2012,46:1819-1830. [2] ZHANG ZH Y. Thermo-mechanical behavior of polymer composites exposed fire[D]. Virginia:Balcksburg,2010. [3] BAHRAMIAN A R,KOKABI M. Ablation and thermal degradation behaviour of a composite based on resol type phenolic resin: process modeling and experimental[J]. Polymer,2006,47:3661-3673. [4] 陈敏孙,江厚满.切向空气气流对激光烧蚀碳纤维复合材料过程的影响[J]. 光学 精密工程,2011,19(2):482-486. CHEN M S,JIANG H M. Influence of tangential airflows on process of laser ablating carbon-fiber composites[J]. Opt. Precision Eng.,2011,19(2):482-486.(in Chinese) [5] 徐斌,伍晓宇,罗烽,等.0Cr18Ni9不锈钢箔的飞秒激光烧蚀[J].光学 精密工程,2012,20(1):45-51. XU B,WU X Y,LUO F,et al.. Ablation of 0Cr18Ni9 stainless steel films by femtosecond laser[J]. Opt. Precision Eng.,2012,20(1):45-51.(in Chinese) [6] TARASENKO V F,PANCHENKO A N,BULGAKOVA N M,et al.. Formation of microstructure on liquid metal surface under nanosecond laser ablation[J]. Chinese Optics,2011,4(1):46-52. [7] 陈林柱.蜂窝复合材料的激光烧蚀效应实验研究[M].西安:西北核技术研究所,2010. CHEN L ZH. Experiment Research of Laser Ablation Effect of Honeycomb Composite Material[M]. Xi'an:Northwest Institute of Nuclear Technology,2010.(in Chinese) [8] 常新龙,李正亮,胡波,等.碳纤维/环氧树脂层合板的激光烧蚀特性分析[J].红外与激光工程,2011,40(9):1691-1695. CHANG X L,LI ZH L,HU B,et al.. Analysis of carbon/epoxy laminates ablation subject to laser irradiation[J]. Infrared and Laser Eng.,2011,40(9):1691-1695.(in Chinese) [9] 汤文辉,冉宪文,徐志宏,等.强激光对靶材烧蚀效应的数值模拟研究[J].航天器环境工程,2010,27(1):32-34. TANG W H,RAN X W,XU ZH H,et al.. Numerical simulation of high intensity laser ablation of materials[J]. Spacecraft Environment Eng.,2010,27(1):32-34.(in Chinese) [10] 李雅娣,张钢锤,吴平,等.炭纤维/环氧树脂复合材料层板连续激光烧蚀数值计算[J].固体火箭技术,2008,31(3):262-265. LI Y D,ZHANG G CH,WU P,et al.. Numerical calculation for ablation of carbon fiber/epoxy resin laminated composites under continuous laser irradiation[J]. J. Solid Rocket Technology,2008,31(3):262-265.(in Chinese) [11] SEMAK V V. Modeling of laser charring and material removal in fiberglass material[J]. J. Directed Energy,2006,2:5-21. [12] GRIFFIS C A,MASUMURA R A. Thermal response of graphite epoxy composite subjected to rapid heating[J]. J. Composite Materials,1981,15:427-442. [13] ZIENKIEWICZ O C,TAYLOR R L. The Finite Element Method:Fluid Fynamics[M]. 5th ed. Beijing:Tsinghua University Press,2007.