[1] BATOOL F. A review paper on:organic light-emitting diode (OLED) technology and applications[J]. IJARCCE, 2016, 5(11):152-156.
[2] 李寒东.喷墨印刷将推动OLED显示制造技术快速发展[J].网印工业, 2018(3):24-25. doi:  10.3969/j.issn.1007-2160.2018.03.010

LI H D. Inkjet printing will promote the rapid development of OLED display manufacturing technology[J]. Screen Printing Industry, 2018(3):24-25. (in Chinese) doi:  10.3969/j.issn.1007-2160.2018.03.010
[3] 李继军, 聂晓梦, 甄威, 等.显示技术比较及新进展[J].液晶与显示, 2018, 33(1):78-84. http://d.old.wanfangdata.com.cn/Periodical/yjyxs201801011

LI J J, NIE X M, ZHEN W, et al.. New developments and comparisons in display technology[J]. Chinese Journal of Liquid Crystals and Displays, 2018, 33(1):78-84. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/yjyxs201801011
[4] LAN L H, ZOU J H, JIANG C B, et al.. Inkjet printing for electroluminescent devices:emissive materials, film formation, and display prototypes[J]. Frontiers of Optoelectronics, 2017, 10(4):329-352. doi:  10.1007/s12200-017-0765-x
[5] BURROUGHES J H, BRADLEY D D C, BROWN A R, et al.. Light-emitting diodes based on conjugated polymers[J]. Nature, 1990, 347(6293):539-541. doi:  10.1038/347539a0
[6] HEBNER T R, WU C C, MARCY D, et al.. Inkjet printing of doped polymers for organic light emitting devices[J]. Applied Physics Letters, 1998, 72(5):519-521. doi:  10.1063/1.120807
[7] 林杨鸣, 曲轶, 于新红, 等.喷墨打印聚合物薄膜均匀性调控研究进展[J].应用化学, 2018, 35(2):129-136. http://d.old.wanfangdata.com.cn/Periodical/yyhx201802002

LIN Y M, QU Y, YU X H, et al.. Research progress on modulation of film thickness uniformity of polymer films by inkjet printing[J]. Chinese Journal of Applied Chemistry, 2018, 35(2):129-136. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/yyhx201802002
[8] DE GANS B J, DUINEVELD P C, SCHUBERT U S. Inkjet printing of polymers:state of the art and future developments[J]. Advanced Materials, 2004, 16(3):203-213. doi:  10.1002/adma.200300385
[9] 魏玉瑶, 孙子乔, 任昊慧, 等.微液滴生成方法研究进展[J].分析化学, 2019, 47(6):795-804. http://d.old.wanfangdata.com.cn/Periodical/fxhx201906001

WEI Y Y, SUN Z Q, REN H H, et al.. Advances in microdroplet generation methods[J]. Chinese Journal of Analytical Chemistry, 2019, 47(6):795-804. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/fxhx201906001
[10] BRÜNAHL J, GRISHIN A M. Piezoelectric shear mode drop-on-demand inkjet actuator[J]. Sensors and Actuators A:Physical, 2002, 101(3):371-382. doi:  10.1016/S0924-4247(02)00212-1
[11] DE GANS B J, SCHUBERT U S. Inkjet printing of polymer micro-arrays and libraries:instrumentation, requirements, and perspectives[J]. Macromolecular Rapid Communications, 2003, 24(11):659-666. doi:  10.1002/marc.200350010
[12] CHANG J Q, LIU Y X, HUANG B. Effects of dwell time of excitation waveform on meniscus movements for a tubular piezoelectric print-head:experiments and model[J]. Journal of Micromechanics and Microengineering, 2017, 27(7):075023. doi:  10.1088/1361-6439/aa7040
[13] TEKIN E, SMITH P J, SCHUBERT U S. Inkjet printing as a deposition and patterning tool for polymers and inorganic particles[J]. Soft Matter, 2008, 4(4):703-713. doi:  10.1039/b711984d
[14] ABBEL R, DE VRIES I, LANGEN A, et al.. Toward high volume solution based roll-to-roll processing of OLEDs[J]. Journal of Materials Research, 2017, 32(12):2219-2229. doi:  10.1557/jmr.2017.204
[15] FRÖBEL M, FRIES F, SCHWAB T, et al.. Three-terminal RGB full-color OLED pixels for ultrahigh density displays[J]. Scientific Reports, 2018, 8(1):9684. doi:  10.1038/s41598-018-27976-z
[16] DUINEVELD P C, DE KOK M M, BUECHEL M, et al.. Ink-jet printing of polymer light-emitting devices[J]. Proceedings of SPIE, 2002, 4464:59-67. doi:  10.1117/12.457460
[17] 钟可君, 伏燕军, 江光裕.锥状微结构阵列提高OLED出光效率的研究[J].液晶与显示, 2018, 33(10):823-830. http://d.old.wanfangdata.com.cn/Periodical/yjyxs201810001

ZHONG K J, FU Y J, JIANG G Y. Improvement of OLED luminous efficiency by cone-shaped microstructure array[J]. Chinese Journal of Liquid Crystals and Displays, 2018, 33(10):823-830. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/yjyxs201810001
[18] FUNAMOTO T, MATSUEDA Y, YOKOYAMA O, et al.. 27.5:Late news paper:a 130-ppi, full-color polymer OLED display fabricated using an ink-jet process[J]. SID Symposium Digest of Technical Papers, 2012, 33(1):899-901. http://d.old.wanfangdata.com.cn/Periodical/gydq200803007
[19] ZHANG W F, LI N, KOGA D, et al.. Inkjet printing based droplet generation for integrated online digital polymerase chain reaction[J]. Analytical Chemistry, 2018, 90(8):5329-5334. doi:  10.1021/acs.analchem.8b00463
[20] WANG J H, SONG CH, ZHONG ZH M, et al.. In situ patterning of microgrooves via inkjet etching for a solution-processed OLED display[J]. Journal of Materials Chemistry C, 2017, 5(20):5005-5009. doi:  10.1039/C7TC01330B
[21] 刘南柳.湿法制备有机半导体器件及其应用研究[D].广州: 华南理工大学, 2009.

LIU N L. Preparation and application of organic semiconductor devices by wet method[D]. Guangzhoua: South China University of Technology, 2009. (in Chinese)
[22] 焦志强, 黄清雨, 张娟, 等. OLED材料与器件研究进展[J].新材料产业, 2018(2):25-29. http://d.old.wanfangdata.com.cn/Periodical/hgxxcl201205004

JIAO ZH Q, HUANG Q Y, ZHANG J, et al.. OLED advances in materials and devices[J]. Advanced Materials Industry, 2018(2):25-29. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/hgxxcl201205004
[23] GENSLER M, BOEFFEL C, KRÖPKE S, et al.. 82-5:late-news paper:high-resolution printing for future processing of RGB OLED displays[J]. SID Symposium Digest of Technical Papers, 2018, 49(1):1117-1119. doi:  10.1002/sdtp.12115
[24] KIM S S, KIM H S, LEE J G, et al.. 64-1:Invited paper:ultra-high precision inkjet printing technology for display[J]. SID Symposium Digest of Technical Papers, 2018, 49(1):839-842. doi:  10.1002/sdtp.12244
[25] MU L, HU ZH H, ZHONG ZH M, et al.. Inkjet-printing line film with varied droplet-spacing[J]. Organic Electronics, 2017, 51:308-313. doi:  10.1016/j.orgel.2017.08.012
[26] KANT P, HAZEL A L, DOWLING M, et al.. Sequential deposition of microdroplets on patterned surfaces[J]. Soft Matter, 2018, 14(43):8709-8716. doi:  10.1039/C8SM01373J
[27] FROMM J E. Numerical calculation of the fluid dynamics of drop-on-demand jets[J]. IBM Journal of Research and Development, 1984, 28(3):322-333. doi:  10.1147/rd.283.0322
[28] JANG D, KIM D, MOON J. Influence of fluid physical properties on ink-jet printability[J]. Langmuir, 2009, 25(5):2629-2635. doi:  10.1021/la900059m
[29] SINGH A, MANDAL S, SINGH V, et al.. Inkjet printed PEDOT:PSS for organic devices[J]. Proceedings of SPIE, 2012, 8549:854936. doi:  10.1117/12.928190
[30] TORRISI F, HASAN T, WU W P, et al.. Inkjet-printed graphene electronics[J]. ACS Nano, 2012, 6(4):2992-3006. doi:  10.1021/nn2044609
[31] MUNDO C, SOMMERFELD M, TROPEA C. Droplet-wall collisions:experimental studies of the deformation and breakup process[J]. International Journal of Multiphase Flow, 1995, 21(2):151-173. doi:  10.1016/0301-9322(94)00069-V
[32] SCHIAFFINO S, SONIN A A. Molten droplet deposition and solidification at low weber numbers[J]. Physics of Fluids, 1997, 9(11):3172-3187. doi:  10.1063/1.869434
[33] DEEGAN R D, BAKAJIN O, DUPONT T F, et al.. Capillary flow as the cause of ring stains from dried liquid drops[J]. Nature, 1997, 389(6653):827-829. doi:  10.1038/39827
[34] XIA S A, CHEON K O, BROOKS J J, et al.. 22.2:printable phosphorescent organic light emitting devices[J]. SID Symposium Digest of Technical Papers, 2008, 39(1):295-298. doi:  10.1889/1.3069650
[35] WANG D D, WU ZH X, ZHANG X W, et al.. Solution-processed organic films of multiple small-molecules and white light-emitting diodes[J]. Organic Electronics, 2010, 11(4):641-648. doi:  10.1016/j.orgel.2010.01.004
[36] LIU H M, WEI X, TAN W Y, et al.. Line printing solution-processable small molecules with uniform surface profile via ink-jet printer[J]. Journal of Colloid and Interface Science, 2016, 465:106-111. doi:  10.1016/j.jcis.2015.11.067
[37] GORTER H, COENEN M J J, SLAATS M W L, et al.. Toward inkjet printing of small molecule organic light emitting diodes[J]. Thin Solid Films, 2013, 532:11-15. doi:  10.1016/j.tsf.2013.01.041
[38] FAN ZH Q, CHENG CH H, YU SH K, et al.. Red and near-infrared electroluminescence from organic light-emitting devices based on a soluble substituted metal-free phthalocyanine[J]. Optical Materials, 2009, 31(6):889-894. doi:  10.1016/j.optmat.2008.10.023
[39] DING Z CH, XING R B, FU Q, et al.. Patterning of pinhole free small molecular organic light-emitting films by ink-jet printing[J]. Organic Electronics, 2011, 12(4):703-709. doi:  10.1016/j.orgel.2011.01.027
[40] TEICHLER A, PERELAER J, SCHUBERT U S. Inkjet printing of organic electronics-comparison of deposition techniques and state-of-the-art developments[J]. Journal of Materials Chemistry C, 2013, 1(10):1910-1925. doi:  10.1039/c2tc00255h
[41] 彭俊彪.喷墨打印薄膜及其发光显示[J].光学与光电技术, 2018, 16(4):1-7. http://d.old.wanfangdata.com.cn/Periodical/gxygdjs201804001

PENG J B. Ink jet printing film and its display[J]. Optics & Optoelectronic Technology, 2018, 16(4):1-7. (in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gxygdjs201804001
[42] JHULKI S, MOORTHY J N. Small molecular hole-transporting materials (HTMs) in organic light-emitting diodes (OLEDs):structural diversity and classification[J]. Journal of Materials Chemistry C, 2018, 6(31):8280-8325. doi:  10.1039/C8TC01300D
[43] SINGH M, HAVERINEN H M, DHAGAT P, et al.. Inkjet printing-process and its applications[J]. Advanced Materials, 2010, 22(6):673-685. doi:  10.1002/adma.200901141
[44] XIE L M, ZHUANG J Y, CHEN X L, et al.. 0.7% Roll-off for solution-processed blue phosphorescent OLEDs with a novel electron transport material[J]. ACS Photonics, 2017, 4(3):449-453.
[45] XING ZH H, ZHUANG J Y, WEI CH T, et al.. Inkjet-printed quantum dot light-emitting diodes with an air-stable hole transport material[J]. ACS Applied Materials & Interfaces, 2017, 9(19):16351-16359. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=6acd54d654761da71f6bc0a9e66a80e8
[46] OLIVIER S, ISHOW E, DELLA-GATTA S M, et al.. Inkjet deposition of a hole-transporting small molecule to realize a hybrid solution-evaporation green top-emitting OLED[J]. Organic Electronics, 2017, 49:24-32. doi:  10.1016/j.orgel.2017.06.017
[47] SUN J ZH, KANG M X, SONG Y L, et al.. Control and application of "coffee ring" effect in inkjet printing[J]. Progress in Chemistry, 2015, 27(8):979-985. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hxjz201508001
[48] LI Y N, YANG Q, LI M ZH, et al.. Rate-dependent interface capture beyond the coffee-ring effect[J]. Scientific Reports, 2016, 6(1):24628. doi:  10.1038/srep24628
[49] CRIVOI A, DUAN F. Three-dimensional Monte Carlo model of the coffee-ring effect in evaporating colloidal droplets[J]. Scientific Reports, 2014, 4(1):4310.
[50] WU L, DONG ZH CH, KUANG M X, et al.. Printing patterned fine 3D structures by manipulating the three phase contact line[J]. Advanced Functional Materials, 2015, 25(15):2237-2242. doi:  10.1002/adfm.201404559
[51] SOLTMAN D, SUBRAMANIAN V. Inkjet-printed line morphologies and temperature control of the coffee ring effect[J]. Langmuir, 2008, 24(5):2224-2231. doi:  10.1021/la7026847
[52] XING R B, YE T L, DING Y, et al.. Thickness uniformity adjustment of inkjet printed light-emitting polymer films by solvent mixture[J]. Chinese Journal of Chemistry, 2013, 31(11):1449-1454. doi:  10.1002/cjoc.201300507
[53] WEI X, CHEN J, GUAN M, et al.. Application of covalent organic frameworks in chromatographic separation, optical sensing and sample pretreatment[J]. Chinese Journal of Analytical Chemistry, 2019, 47(11):1872-2040. http://d.old.wanfangdata.com.cn/Periodical/fxhx201911002
[54] ZHANG D Y, CAI Y, SHEN Y, et al.. A solid electrode for detection of silver ion based on copper-based metal-organic frameworks doped by multi-walled carbon nanotubes[J]. Chinese Journal of Analytical Chemistry, 2018, 46(11):1794-1801. http://d.old.wanfangdata.com.cn/Periodical/fxhx201811016
[55] KWAN H C, JUN H Y, KYUNG T K, et al.. Fabrication of auxiliary electrodes using Ag inkjet printing for OLED lighting[J]. SID Symposium Digest of Technical Papers, 2018, 49(1):843-846. doi:  10.1002/sdtp.12252
[56] TAO Y, LI J, LI K, et al.. Inkjet-printed Ag grid combined with Ag nanowires to form a transparent hybrid electrode for organic electronics[J]. Organic Electronics, 2017, 41:179-185. doi:  10.1016/j.orgel.2016.10.046