卤化物钙钛矿光伏材料的优化设计研究进展

赵电龙; 李天姝; 徐巧玲; 王雪婷; 张立军; 赵电龙; 李天姝; 徐巧玲; 王雪婷; 张立军

doi:10.3788/CO.20191205.0964

[1]

CHAPIN D M, FULLER C S, PEARSON G L. A new silicon p-n junction photocell for converting solar radiation into electrical power[J]. Journal of Applied Physics, 1954, 25(5):676-677. doi: 10.1063/1.1721711

[2]

WANG Y, JIN Y H, DUAN Y H, et al.. Fe₃O₄ quantum dots on 3D-framed graphene aerogel as an advanced anode material in lithium-ion batteries[J]. Ionics, 2017, 23(8):2005-2011. doi: 10.1007/s11581-017-2044-7

[3]

O'REGAN B, GRÄTZEL M. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO₂ films[J]. Nature, 1991, 353(6346):737-740. doi: 10.1038/353737a0

[4]

MATHEW S, YELLA A, GAO P, et al.. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers[J]. Nature Chemistry, 2014, 6(3):242-247. doi: 10.1038/nchem.1861

[5]

HODES G. Perovskite-based solar cells[J]. Science, 2013, 342(6156):317-318. doi: 10.1126/science.1245473

[6]

KOJIMA A, TESHIMA K, SHIRAI Y, et al.. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells[J]. Journal of the American Chemical Society, 2009, 131(17):6050-6051. doi: 10.1021/ja809598r

[7]

TAN F R, TAN H R, SAIDAMINOV M I, et al.. In situ back-contact passivation improves photovoltage and fill factor in perovskite solar cells[J]. Advanced Materials, 2019, 31(14):1807435. doi: 10.1002/adma.201807435

[8]

BAUHUIS G J, MULDER P, HAVERKAMP E J, et al.. 26.1% thin-film GaAs solar cell using epitaxial lift-off[J]. Solar Energy Materials and Solar Cells, 2009, 93(9):1488-1491. doi: 10.1016/j.solmat.2009.03.027

[9]

SONG B G, AHN H Y, PARK B I, et al.. Effects of compression and controlled selenization on powder-fabricated Cu(In, Ga)Se₂ thin films[J]. Applied Surface Science, 2019, 475:158-161. doi: 10.1016/j.apsusc.2018.12.196

[10]

BRITT J, FEREKIDES C. Thin-film CdS/CdTe solar cell with 15.8% efficiency[J]. Applied Physics Letters, 1993, 62(22):2851-2852. doi: 10.1063/1.109629

[11]

TODOROV T K, TANG J, BAG S, et al.. Beyond 11% efficiency:characteristics of state-of-the-art Cu₂ZnSn(S, Se)₄ solar cells[J]. Advanced Energy Materials, 2013, 3(1):34-38. doi: 10.1002/aenm.201200348

[12]

XING G CH, MATHEWS N, SUN SH Y, et al.. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH₃NH₃PbI₃[J]. Science, 2013, 342(6156):344-347. doi: 10.1126/science.1243167

[13]

GIORGI G, FUJISAWA J I, SEGAWA H, et al.. Small photocarrier effective masses featuring ambipolar transport in methylammonium lead iodide perovskite:a density functional analysis[J]. The Journal of Physical Chemistry Letters, 2013, 4(24):4213-4216. doi: 10.1021/jz4023865

[14]

FROHNA K, DESHPANDE T, HARTER J, et al.. Inversion symmetry and bulk Rashba effect in methylammonium lead iodide perovskite single crystals[J]. Nature Communications, 2018, 9:1829. doi: 10.1038/s41467-018-04212-w

[15]

STRANKS S D, EPERON G E, GRANCINI G, et al.. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber[J]. Science, 2013, 342(6156):341-344. doi: 10.1126/science.1243982

[16]

WEHRENFENNIG C, EPERON G E, JOHNSTON M B, et al.. High charge carrier mobilities and lifetimes in organolead trihalide perovskites[J]. Advanced Materials, 2014, 26(10):1584-1589. doi: 10.1002/adma.201305172

[17]

EDRI E, KIRMAYER S, MUKHOPADHYAY S, et al.. Elucidating the charge carrier separation and working mechanism of CH₃NH₃PbI_3-xCl_x perovskite solar cells[J]. Nature Communications, 2014, 5:3461. doi: 10.1038/ncomms4461

[18]

MIYATA A, MITIOGLU A, PLOCHOCKA P, et al.. Direct measurement of the exciton binding energy and effective masses for charge carriers in organic-inorganic tri-halide perovskites[J]. Nature Physics, 2015, 11(7):582-587. doi: 10.1038/nphys3357

[19]

BAUMANN A, VÄTH S, RIEDER P, et al.. Identification of trap states in perovskite solar cells[J]. The Journal of Physical Chemistry Letters, 2015, 6(12) 2350-2354. doi: 10.1021/acs.jpclett.5b00953

[20]

DUAN H S, ZHOU H P, CHEN Q, et al.. The identification and characterization of defect states in hybrid organic-inorganic perovskite photovoltaics[J]. Physical Chemistry Chemical Physics, 2015, 17(1):112-116. doi: 10.1039/C4CP04479G

[21]

WANG J T W, WANG ZH P, PATHAK S, et al.. Efficient perovskite solar cells by metal ion doping[J]. Energy & Environmental Science, 2016, 9(9):2892-2901. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=0f10449972987006d2c6d75da5894f1d

[22]

ZHAO D W, YU Y, WANG CH L, et al.. Low-bandgap mixed tin-lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells[J]. Nature Energy, 2017, 2(4):17018. doi: 10.1038/nenergy.2017.18

[23]

XIAO Z W, YAN Y F. Progress in theoretical study of metal halide perovskite solar cell materials[J]. Advanced Energy Materials, 2017, 7(22):1701136. doi: 10.1002/aenm.201701136

[24]

YIN W J, SHI T T, YAN Y F. Unique properties of halide perovskites as possible origins of the superior solar cell performance[J]. Advanced Materials, 2014, 26(27):4653-4658. doi: 10.1002/adma.201306281

[25]

LI Z, YANG M J, PARK J S, et al.. Stabilizing perovskite structures by tuning tolerance factor:formation of formamidinium and cesium lead iodide solid-state alloys[J]. Chemistry of Materials, 2016, 28(1):284-292. doi: 10.1021/acs.chemmater.5b04107

[26]

ZHANG H, WANG H, WILLIAMS S T, et al.. SrCl₂ derived perovskite facilitating a high efficiency of 16% in hole-conductor-free fully printable mesoscopic perovskite solar cells[J]. Advanced Materials, 2017, 29(15):1606608. doi: 10.1002/adma.201606608

[27]

LI L, LIU N, XU Z Q, et al.. Precise composition tailoring of mixed-cation hybrid perovskites for efficient solar cells by mixture design methods[J]. ACS Nano, 2017, 11(9):8804-8813. doi: 10.1021/acsnano.7b02867

[28]

PELLET N, GAO P, GREGORI G, et al.. Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting[J]. Angewandte Chemie International Edition, 2014, 53(12):3151-3157. doi: 10.1002/anie.201309361

[29]

LEE M M, TEUSCHER J, MIYASAKA T, et al.. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites[J]. Science, 2012, 338(6107):643-647. doi: 10.1126/science.1228604

[30]

NOH J H, IM S H, HEO J H, et al.. Chemical management for colorful, efficient, and stable inorganic organic hybrid nanostructured solar cells[J]. Nano Letters, 2013, 13(4):1764-1769. doi: 10.1021/nl400349b

[31]

OGOMI Y, MORITA A, TSUKAMOTO S, et al.. CH₃NH₃Sn_xPb(_1-x)I₃ perovskite solar cells covering up to 1060 nm[J]. The Journal of Physical Chemistry Letters, 2014, 5(6):1004-1011. doi: 10.1021/jz5002117

[32]

SALIBA M, MATSUI T, SEO J Y, et al.. Cesium-containing triple cation perovskite solar cells:improved stability, reproducibility and high efficiency[J]. Energy & Environmental Science, 2016, 9(6):1989-1997. https://www.ncbi.nlm.nih.gov/pubmed/27478500

[33]

GRÄTZEL M. The light and shade of perovskite solar cells[J]. Nature Materials, 2014, 13(9):838-842. doi: 10.1038/nmat4065

[34]

SAPAROV B, MITZI D B. Organic-inorganic perovskites:Structural versatility for functional materials design[J]. Chemical Reviews, 2016, 116(7) 4558-4596. doi: 10.1021/acs.chemrev.5b00715

[35]

HU H, DONG B H, ZHANG W. Low-toxic metal halide perovskites:opportunities and future challenges[J]. Journal of Materials Chemistry A, 2017, 5(23):11436-11449. doi: 10.1039/C7TA00269F

[36]

MANSER J S, CHRISTIANS J A, KAMAT P V. Intriguing optoelectronic properties of metal halide perovskites[J]. Chemical Reviews, 2016, 116(21):12956-13008. doi: 10.1021/acs.chemrev.6b00136

[37]

YIN W J, YANG J H, KANG J, et al.. Halide perovskite materials for solar cells:a theoretical review[J]. Journal of Materials Chemistry A, 2015, 3(17):8926-8942. doi: 10.1039/C4TA05033A

[38]

XU Q L, YANG D W, LV J, et al.. Perovskite solar absorbers:materials by design[J]. Small Methods, 2018, 2(5):1700316. doi: 10.1002/smtd.201700316

[39]

ZHAO X G, YANG D W, REN J CH, et al.. Rational design of halide double perovskites for optoelectronic applications[J]. Joule, 2018, 2(9):1662-1673. doi: 10.1016/j.joule.2018.06.017

[40]

LIANG L SH, GAO P. Lead-free hybrid perovskite absorbers for viable application:can we eat the cake and have it too?[J]. Advanced Science, 2018, 5(2):1700331. doi: 10.1002/advs.201700331

[41]

XIAO Z W, MENG W W, WANG J B, et al.. Searching for promising new perovskite-based photovoltaic absorbers:the importance of electronic dimensionality[J]. Materials Horizons, 2017, 4(2):206-216. https://www.onacademic.com/detail/journal_1000042618044499_f68a.html

[42]

XIAO Z W, SONG ZH N, YAN Y F. From lead halide perovskites to lead-free metal halide perovskites and perovskite derivatives[J]. Advanced Materials, 2019:1803792, doi: 10.1002/adma.201803792.

[43]

SALIBA M, MATSUI T, DOMANSKI K, et al.. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance[J]. Science, 2016, 354(6309):206-209. doi: 10.1126/science.aah5557

[44]

LI C, LU X G, DING W ZH, et al.. Formability of ABX₃(X=F, Cl, Br, I) halide perovskites[J]. Acta Crystallographica Section B, 2008, 64(6):702-707. doi: 10.1107/S0108768108032734

[45]

EPERON G E, PATERN G M, SUTTON R J, et al.. Inorganic caesium lead iodide perovskite solar cells[J]. Journal of Materials Chemistry A, 2015, 3(39):19688-19695. doi: 10.1039/C5TA06398A

[46]

STOUMPOS C C, MALLIAKAS C D, KANATZIDIS M G. Semiconducting tin and lead iodide perovskites with organic cations:phase transitions, high mobilities, and near-infrared photoluminescent properties[J]. Inorganic Chemistry, 2013, 52(15):9019-9038. doi: 10.1021/ic401215x

[47]

BAIKIE T, FANG Y N, KADRO J M, et al.. Synthesis and crystal chemistry of the hybrid perovskite (CH₃NH₃)PbI₃ for solid-state sensitised solar cell applications[J]. Journal of Materials Chemistry A, 2013, 1(18):5628-5641. doi: 10.1039/c3ta10518k

[48]

BRIVIO F, FROST J M, SKELTON J M, et al.. Lattice dynamics and vibrational spectra of the orthorhombic, tetragonal, and cubic phases of methylammonium lead iodide[J]. Physical Review B, 2015, 92(14):144308. doi: 10.1103/PhysRevB.92.144308

[49]

MOTTA C, EL-MELLOUHI F, KAIS S, et al.. Revealing the role of organic cations in hybrid halide perovskite CH₃NH₃PbI₃[J]. Nature Communications, 2015, 6:7026. doi: 10.1038/ncomms8026

[50]

YIN W J, SHI T T, YAN Y F. Unusual defect physics in CH₃NH₃PbI₃ perovskite solar cell absorber[J]. Applied Physics Letters, 2014, 104(6):063903. doi: 10.1063/1.4864778

[51]

ZHENG F, TAN L Z, LIU SH, et al.. Rashba spin orbit coupling enhanced carrier lifetime in CH₃NH₃PbI₃[J]. Nano Letters, 2015, 15(12):7794-7800. doi: 10.1021/acs.nanolett.5b01854

[52]

GAO W W, GAO X, ABTEW T A, et al.. Quasiparticle band gap of organic-inorganic hybrid perovskites:crystal structure, spin-orbit coupling, and self-energy effects[J]. Physical Review B, 2016, 93(8):085202. doi: 10.1103/PhysRevB.93.085202

[53]

EL JANI B, GIBART P, PORTAL J C, et al.. Effective masses in Sn-doped Ga_1-xAl_xAs(x < 0.3) determined by the Shubnikov-de Haas effect[J]. Journal of Applied Physics, 1985, 58(9):3481-3484. doi: 10.1063/1.335771

[54]

FAN ZH, SUN K, WANG J. Perovskites for photovoltaics:a combined review of organic-inorganic halide perovskites and ferroelectric oxide perovskites[J]. Journal of Materials Chemistry A, 2015, 3(37):18809-18828. doi: 10.1039/C5TA04235F

[55]

KIM H S, LEE C R, IM J H, et al.. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%[J]. Scientific Reports, 2012, 2:591. doi: 10.1038/srep00591

[56]

LIU M ZH, JOHNSTON M B, SNAITH H J. Efficient planar heterojunction perovskite solar cells by vapour deposition[J]. Nature, 2013, 501(7467):395-398. doi: 10.1038/nature12509

[57]

GREEN M A, MERY K, ISHIKAWA Y, et al.. Solar cell efficiency tables(Version 45)[J]. Progress in Photovoltaics:Research and Applications, 2015, 23(1):1-9. doi: 10.1002/pip.2573

[58]

YANG ZH, SURRENTE A, GALKOWSKI K, et al.. Unraveling the exciton binding energy and the dielectric constant in single-crystal methylammonium lead triiodide perovskite[J]. The Journal of Physical Chemistry Letters, 2017, 8(8):1851-1855. doi: 10.1021/acs.jpclett.7b00524

[59]

DU M H. Efficient carrier transport in halide perovskites:theoretical perspectives[J]. Journal of Materials Chemistry A, 2014, 2(24):9091-9098. doi: 10.1039/C4TA01198H

[60]

TANAKA K, AKAHASHI T, BAN T, et al.. Comparative study on the excitons in lead-halide-based perovskite-type crystals CH₃NH₃PbBr₃ CH₃NH₃PbI₃[J]. Solid State Communications, 2003, 127(9-10):619-623. doi: 10.1016/S0038-1098(03)00566-0

[61]

GALKOWSKI K, MITIOGLU A, MIYATA A, et al.. Determination of the exciton binding energy and effective masses for methylammonium and formamidinium lead tri-halide perovskite semiconductors[J]. Energy & Environmental Science, 2016, 9(3):962-970. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=85de4f0693dbb1e7d581b8c09cfd05d9

[62]

YANG W S, PARK B W, JUNG E H, et al.. Iodide management in formamidinium-lead-halide based perovskite layers for efficient solar cells[J]. Science, 2017, 356(6345):1376-1379. doi: 10.1126/science.aan2301

[63]

ABATE A. Perovskite solar cells go lead free[J]. Joule, 2017, 1(4):659-664. doi: 10.1016/j.joule.2017.09.007

[64]

GANOSE A M, SAVORY C N, SCANLON D O. Beyond methylammonium lead iodide:prospects for the emergent field of ns² containing solar absorbers[J]. Chemical Communications, 2017, 53(1):20-44. doi: 10.1039/C6CC06475B

[65]

CHAKRABORTY S, XIE W, MATHEWS N, et al.. Rational design:a high-throughput computational screening and experimental validation methodology for lead-free and emergent hybrid perovskites[J]. ACS Energy Letters, 2017, 2(4):837-845. doi: 10.1021/acsenergylett.7b00035

[66]

KAMAT P V, BISQUERT J, BURIAK J. Lead-free perovskite solar cells[J]. ACS Energy Letters, 2017, 2(4):904-905. doi: 10.1021/acsenergylett.7b00246

[67]

CHEN W, WU Y ZH, YUE Y F, et al.. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers[J]. Science, 2015, 350(6263):944-948. doi: 10.1126/science.aad1015

[68]

JEON N J, NOH J H, KIM Y C, et al.. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells[J]. Nature Materials, 2014, 13(9):897-903. doi: 10.1038/nmat4014

[69]

SHUKLA S, SHUKLA S, HAUR L J, et al.. Effect of formamidinium/Cesium substitution and PbI₂ on the long-term stability of triple-cation perovskites[J]. ChemSusChem, 2017, 10(19):3804-3809. doi: 10.1002/cssc.201701203

[70]

EDRI E, KIRMAYER S, KULBAK M, et al.. Chloride inclusion and hole transport material doping to improve methyl ammonium lead bromide perovskite-based high open-circuit voltage solar cells[J]. The Journal of Physical Chemistry Letters, 2014, 5(3):429-433. doi: 10.1021/jz402706q

[71]

CAO K, LI H, LIU SH SH, et al.. MAPbI_3-xBr_x mixed halide perovskites for fully printable mesoscopic solar cells with enhanced efficiency and less hysteresis[J]. Nanoscale, 2016, 8(16):8839-8846. doi: 10.1039/C6NR01043A

[72]

COLELLA S, MOSCONI E, FEDELI P, et al.. MAPbI_3-xCl_x mixed halide perovskite for hybrid solar cells:the role of chloride as dopant on the transport and structural properties[J]. Chemistry of Materials, 2013, 25(22):4613-4618. doi: 10.1021/cm402919x

[73]

SUAREZ B, GONZALEZ-PEDRO V, RIPOLLES T S, et al.. Recombination study of combined halides(Cl, Br, I) perovskite solar cells[J]. The Journal of Physical Chemistry Letters, 2014, 5(10):1628-1635. doi: 10.1021/jz5006797

[74]

EPERON G E, STRANKS S D, MENELAOU C, et al.. Formamidinium lead trihalide:a broadly tunable perovskite for efficient planar heterojunction solar cells[J]. Energy & Environmental Science, 2014, 7(3):982-988. https://pubs.rsc.org/en/content/articlelanding/2014/EE/c3ee43822h#!divAbstract

[75]

WANG Z W, ZHOU Y Y, PANG SH P, et al.. Additive-modulated evolution of HC(NH₂)₂PbI₃ black polymorph for mesoscopic perovskite solar cells[J]. Chemistry of Materials, 2015, 27(20):7149-7155. doi: 10.1021/acs.chemmater.5b03169

[76]

CHOI H, JEONG J, KIM H B, et al.. Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells[J]. Nano Energy, 2014, 7:80-85. doi: 10.1016/j.nanoen.2014.04.017

[77]

MCMEEKIN D P, SADOUGHI G, REHMAN W, et al.. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells[J]. Science, 2016, 351(6269):151-155. doi: 10.1126/science.aad5845

[78]

WANG P Y, ZHANG X W, ZHOU Y Q, et al.. Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells[J]. Nature Communications, 2018, 9:2225. doi: 10.1038/s41467-018-04636-4

[79]

WANG Y, ZHANG T Y, KAN M, et al.. Bifunctional stabilization of all-inorganic α-CsPbI₃ perovskite for 17% efficiency photovoltaics[J]. Journal of the American Chemical Society, 2018, 140(39):12345-12348. doi: 10.1021/jacs.8b07927

[80]

HWANG I, JEONG I, LEE J, et al.. Enhancing stability of perovskite solar cells to moisture by the facile hydrophobic passivation[J]. ACS Applied Materials & Interfaces, 2015, 7(31):17330-17336. https://www.ncbi.nlm.nih.gov/pubmed/26154828

[81]

SUPASAI T, RUJISAMPHAN N, ULLRICH K, et al.. Formation of a passivating CH₃NH₃PbI₃/PbI₂ interface during moderate heating of CH₃NH₃PbI₃ layers[J]. Applied Physics Letters, 2013, 103(18):183906. doi: 10.1063/1.4826116

[82]

WANG L L, MCCLEESE C, KOVALSKY A, et al.. Femtosecond time-resolved transient absorption spectroscopy of CH₃NH₃PbI₃ perovskite films:evidence for passivation effect of PbI₂[J]. Journal of the American Chemical Society, 2014, 136(35):12205-12208. doi: 10.1021/ja504632z

[83]

BU X N, WESTBROOK R J E, LANZETTA L, et al.. Surface passivation of perovskite films via iodide salt coatings for enhanced stability of organic lead halide perovskite solar cells[J]. Solar RRL, 2019, 3(2):1800282.

[84]

HOU Y, ZHOU Z R, WEN T Y, et al.. Enhanced moisture stability of metal halide perovskite solar cells based on sulfur oleylamine surface modification[J]. Nanoscale Horizons, 2019, 4(1):208-213. doi: 10.1039/C8NH00163D

[85]

DOMANSKI K, CORREA-BAENA J P, MINE N, et al.. Not all that glitters is gold:metal-migration-induced degradation in perovskite solar cells[J]. ACS Nano, 2016, 10(6):6306-6314. doi: 10.1021/acsnano.6b02613

[86]

DA P M, CHA M Y, SUN L, et al.. High-performance perovskite photoanode enabled by Ni passivation and catalysis[J]. Nano Letters, 2015, 15(5):3452-3457. doi: 10.1021/acs.nanolett.5b00788

[87]

WANG CH W, YANG SH, CHEN X, et al.. Surface-functionalized perovskite films for stable photoelectrochemical water splitting[J]. Journal of Materials Chemistry A, 2017, 5(3):910-913. doi: 10.1039/C6TA08812K

[88]

GINTING R T, JEON M K, LEE K J, et al.. Degradation mechanism of planar-perovskite solar cells:correlating evolution of iodine distribution and photocurrent hysteresis[J]. Journal of Materials Chemistry A, 2017, 5(9):4527-4534. doi: 10.1039/C6TA09202K

[89]

LI Y L, SUN W H, YAN W B, et al.. 50% Sn-based planar perovskite solar cell with power conversion efficiency up to 13.6%[J]. Advanced Energy Materials, 2016, 6(24):1601353. doi: 10.1002/aenm.201601353

[90]

WANG ZH K, LI M, YANG Y G, et al.. High efficiency Pb-In binary metal perovskite solar cells[J]. Advanced Materials, 2016, 28(31):6695-6703. doi: 10.1002/adma.201600626

[91]

HAO F, STOUMPOS C C, CAO D H, et al.. Lead-free solid-state organic inorganic halide perovskite solar cells[J]. Nature Photonics, 2014, 8(6) 489-494. doi: 10.1038/nphoton.2014.82

[92]

LIAO W Q, ZHAO D W, YU Y, et al.. Lead-free inverted planar formamidinium tin triiodide perovskite solar cells achieving power conversion efficiencies up to 6.22%[J]. Advanced Materials, 2016, 28(42):9333-9340. doi: 10.1002/adma.201602992

[93]

KUMAR A, BALASUBRAMANIAM K R, KANGSABANIK J, et al.. Crystal structure, stability, and optoelectronic properties of the organic-inorganic wide-band-gap perovskite CH₃NH₃BaI₃:candidate for transparent conductor applicationsapplications[J]. Physical Review B, 2016, 94(18):180105. doi: 10.1103/PhysRevB.94.180105

[94]

KRISHNAMOORTHY T, DING H, YAN CH, et al.. Lead-free germanium iodide perovskite materials for photovoltaic applications[J]. Journal of Materials Chemistry A, 2015, 3(47):23829-23832. doi: 10.1039/C5TA05741H

[95]

MING W M, SHI H L, DU M H. Large dielectric constant, high acceptor density, and deep electron traps in perovskite solar cell material CsGeI₃[J]. Journal of Materials Chemistry A, 2016, 4(36):13852-13858. doi: 10.1039/C6TA04685A

[96]

NOEL N K, STRANKS S D, ABATE A, et al.. Lead-free organic-inorganic tin halide perovskites for photovoltaic applications[J]. Energy & Environmental Science, 2014, 7(9):3061-3068. https://pubs.rsc.org/en/content/articlelanding/2014/EE/C4EE01076K#!divAbstract

[97]

SHAO SH Y, LIU J, PORTALE G, et al.. Highly reproducible Sn-based hybrid perovskite solar cells with 9% efficiency[J]. Advanced Energy Materials, 2018, 8(4):1702019. doi: 10.1002/aenm.201702019

[98]

WANG F, JIANG X Y, CHEN H, et al.. 2D-Quasi-2D-3D hierarchy structure for tin perovskite solar cells with enhanced efficiency and stability[J]. Joule, 2018, 2(12):2732-2743. doi: 10.1016/j.joule.2018.09.012

[99]

STOUMPOS C C, FRAZER L, CLARK D J, et al.. Hybrid germanium iodide perovskite semiconductors:active lone pairs, structural distortions, direct and indirect energy gaps, and strong nonlinear optical properties[J]. Journal of the American Chemical Society, 2015, 137(21):6804-6819. doi: 10.1021/jacs.5b01025

[100]

CHEN M, JU M G, GARCES H F, et al.. Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation[J]. Nature Communications, 2019, 10:16. doi: 10.1038/s41467-018-07951-y

[101]

YANG D W, LV J, ZHAO X G, et al.. Functionality-directed screening of Pb-free hybrid organic-inorganic perovskites with desired intrinsic photovoltaic functionalities[J]. Chemistry of Materials, 2017, 29(2):524-538. doi: 10.1021/acs.chemmater.6b03221

[102]

JIANG Q L, REBOLLAR D, GONG J, et al.. Pseudohalide-induced moisture tolerance in perovskite CH₃NH₃Pb(SCN)₂I thin films[J]. Angewandte Chemie International Edition, 2015, 54(26):7617-7620. doi: 10.1002/anie.201503038

[103]

LIANG J, WANG C X, WANG Y R, et al.. All-inorganic perovskite solar cells[J]. Journal of the American Chemical Society, 2016, 138(49):15829-15832. doi: 10.1021/jacs.6b10227

[104]

LIANG J, ZHAO P Y, WANG C X, et al.. CsPb_0.9Sn_0.1IBr₂ based all-inorganic perovskite solar cells with exceptional efficiency and stability[J]. Journal of the American Chemical Society, 2017, 139(40):14009-14012. doi: 10.1021/jacs.7b07949

[105]

LIANG J, LIU J, JIN ZH. All-inorganic halide perovskites for optoelectronics:progress and prospects[J]. Solar RRL, 2017, 1(10):1700086. doi: 10.1002/solr.201700086

[106]

DIRIN D N, CHERNIUKH I, YAKUNIN S, et al.. Solution-grown CsPbBr₃ perovskite single crystals for photon detection[J]. Chemistry of Materials, 2016, 28(23):8470-8474. doi: 10.1021/acs.chemmater.6b04298

[107]

PROTESESCU L, YAKUNIN S, BODNARCHUK M I, et al.. Nanocrystals of cesium lead halide perovskites (CsPbX₃, X=Cl, Br, and I):novel optoelectronic materials showing bright emission with wide color gamut[J]. Nano Letters, 2015, 15(6):3692-3696. doi: 10.1021/nl5048779

[108]

ZHANG T K, LONG M ZH, YAN K Y, et al.. Crystallinity preservation and ion migration suppression through dual ion exchange strategy for stable mixed perovskite solar cells[J]. Advanced Energy Materials, 2017, 7(15):1700118. doi: 10.1002/aenm.201700118

[109]

SLAVNEY A H, HU T, LINDENBERG A M, et al.. A bismuth-halide double perovskite with long carrier recombination lifetime for photovoltaic applications[J]. Journal of the American Chemical Society, 2016, 138(7):2138-2141. doi: 10.1021/jacs.5b13294

[110]

VOLONAKIS G, FILIP M R, HAGHIGHIRAD A A, et al.. Lead-free halide double perovskites via heterovalent substitution of noble metals[J]. The Journal of Physical Chemistry Letters, 2016, 7(7):1254-1259. doi: 10.1021/acs.jpclett.6b00376

[111]

MCCLURE E T, BALL M R, WINDL W, et al.. Cs₂AgBiX₆(X=Br, Cl):new visible light absorbing, lead-free halide perovskite semiconductors[J]. Chemistry of Materials, 2016, 28(5):1348-1354. doi: 10.1021/acs.chemmater.5b04231

[112]

FILIP M R, HILLMAN S, HAGHIGHIRAD A A, et al.. Band gaps of the lead-free halide double perovskites Cs₂BiAgCl₆ and Cs₂BiAgBr₆ from theory and experiment[J]. The Journal of Physical Chemistry Letters, 2016, 7(13):2579-2585. doi: 10.1021/acs.jpclett.6b01041

[113]

ZHAO X G, YANG J H, FU Y H, et al.. Design of lead-free inorganic halide perovskites for solar cells via cation-transmutation[J]. Journal of the American Chemical Society, 2017, 139(7):2630-2638. doi: 10.1021/jacs.6b09645

[114]

VOLONAKIS G, HAGHIGHIRAD A A, SNAITH H J, et al.. Route to stable lead-free double perovskites with the electronic structure of CH₃NH₃PbI₃:a case for mixed-cation[Cs/CH₃NH₃/CH(NH₂)₂]₂InBiBr₆[J]. The Journal of Physical Chemistry Letters, 2017, 8(16):3917-3924. doi: 10.1021/acs.jpclett.7b01584

[115]

QUAN L N, YUAN M J, COMIN R, et al.. Ligand-stabilized reduced-dimensionality perovskites[J]. Journal of the American Chemical Society, 2016, 138(8):2649-2655. doi: 10.1021/jacs.5b11740

[116]

TRAN T T, PANELLA J R, CHAMORRO J R, et al.. Designing indirect-direct bandgap transitions in double perovskites[J]. Materials Horizons, 2017, 4(4):688-693. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=2e6aed3b09168c262ccfa2c535d66b1b

[117]

DU K ZH, MENG W W, WANG X M, et al.. Bandgap engineering of lead-free double perovskite Cs₂AgBiBr₆ through trivalent metal alloying[J]. Angewandte Chemie International Edition, 2017, 56(28):8158-8162. doi: 10.1002/anie.201703970

[118]

SLAVNEY A H, LEPPERT L, BARTESAGHI D, et al.. Defect-induced band-edge reconstruction of a bismuth-halide double perovskite for visible-light absorption[J]. Journal of the American Chemical Society, 2017, 139(14):5015-5018. doi: 10.1021/jacs.7b01629

[119]

GREUL E, PETRUS M L, BINEK A, et al.. Highly stable, phase pure Cs₂AgBiBr₆ double perovskite thin films for optoelectronic applications[J]. Journal of Materials Chemistry A, 2017, 5(37):19972-19981. doi: 10.1039/C7TA06816F

[120]

NING W H, WANG F, WU B, et al.. Long electron-hole diffusion length in high-quality lead-free double perovskite films[J]. Advanced Materials, 2018, 30(20):1706246. doi: 10.1002/adma.201706246

[121]

WU C C, ZHANG Q H, LIU Y, et al.. The dawn of lead-free perovskite solar cell:highly stable double perovskite Cs₂AgBiBr₆ film[J]. Advanced Science, 2018, 5(3):1700759. doi: 10.1002/advs.201700759

[122]

WEI F X, DENG Z Y, SUN SH J, et al.. Synthesis and properties of a lead-free hybrid double perovskite:(CH₃NH₃)₂AgBiBr₆[J]. Chemistry of Materials, 2017, 29(3):1089-1094. doi: 10.1021/acs.chemmater.6b03944

[123]

CHENG P F, WU T, LI Y J, et al.. Combining theory and experiment in the design of a lead-free ((CH₃NH₃)₂AgBiI₆) double perovskite[J]. New Journal of Chemistry, 2017, 41(18):9598-9601. doi: 10.1039/C7NJ02365K

[124]

ZHAO X G, YANG D W, SUN Y H, et al.. Cu-In halide perovskite solar absorbers[J]. Journal of the American Chemical Society, 2017, 139(19):6718-6725. doi: 10.1021/jacs.7b02120

[125]

VOLONAKIS G, HAGHIGHIRAD A A, MILOT R L, et al.. Cs₂InAgCl₆:a new lead-free halide double perovskite with direct band gap[J]. The Journal of Physical Chemistry Letters, 2017, 8(4):772-778. doi: 10.1021/acs.jpclett.6b02682

[126]

MENG W W, WANG X M, XIAO Z W, et al.. Parity-forbidden transitions and their impact on the optical absorption properties of lead-free metal halide perovskites and double perovskites[J]. The Journal of Physical Chemistry Letters, 2017, 8(13):2999-3007. doi: 10.1021/acs.jpclett.7b01042

[127]

ZHOU J, XIA ZH G, MOLOKEEV M S, et al.. Composition design, optical gap and stability investigations of lead-free halide double perovskite Cs₂AgInCl₆[J]. Journal of Materials Chemistry A, 2017, 5(29):15031-15037. doi: 10.1039/C7TA04690A

[128]

LUO J J, WANG X M, LI SH R, et al.. Efficient and stable emission of warm-white light from lead-free halide double perovskites[J]. Nature, 2018, 563(7732):541-545. doi: 10.1038/s41586-018-0691-0

[129]

K N N, NAG A. Synthesis and luminescence of Mn-doped Cs₂AgInCl₆ double perovskites[J]. Chemical Communications, 2018, 54(41):5205-5208. doi: 10.1039/C8CC01982G

[130]

XIAO Z W, DU K ZH, MENG W W, et al.. Chemical origin of the stability difference between copper(Ⅰ)-and silver(Ⅰ)-based halide double perovskites[J]. Angewandte Chemie International Edition, 2017, 129(40):12275-12279. https://www.ncbi.nlm.nih.gov/pubmed/28755410

[131]

DENG Z Y, WEI F X, SUN SH J, et al.. Exploring the properties of lead-free hybrid double perovskites using a combined computational-experimental approach[J]. Journal of Materials Chemistry A, 2016, 4(31):12025-12029. doi: 10.1039/C6TA05817E

[132]

XIAO Z W, ZHOU Y Y, HOSONO H, et al.. Bandgap optimization of perovskite semiconductors for photovoltaic applications[J]. Chemistry A European Journal, 2018, 24(10):2305-2316. doi: 10.1002/chem.201705031

[133]

CREUTZ S E, CRITES E N, DE SIENA M C, et al.. Colloidal nanocrystals of lead-free double-perovskite(Elpasolite) semiconductors:synthesis and anion exchange to access new materials[J]. Nano Letters, 2018, 18(2):1118-1123. doi: 10.1021/acs.nanolett.7b04659

[134]

DENG W, DENG Z Y, HE J W, et al.. Synthesis of Cs₂AgSbCl₆ and improved optoelectronic properties of Cs₂AgSbCl₆/TiO₂ heterostructure driven by the interface effect for lead-free double perovskites solar cells[J]. Applied Physics Letters, 2017, 111(15):151602. doi: 10.1063/1.4999192

[135]

LUO J J, LI SH R, WU H D, et al.. Cs₂AgInCl₆ double perovskite single crystals:parity forbidden transitions and their application for sensitive and fast uv photodetectors[J]. ACS Photonics, 2018, 5(2):398-405. doi: 10.1021/acsphotonics.7b00837

[136]

XIAO Z W, ZHOU Y Y, HOSONO H, et al.. Intrinsic defects in a photovoltaic perovskite variant Cs₂SnI₆[J]. Physical Chemistry Chemical Physics, 2015, 17(29):18900-18903. doi: 10.1039/C5CP03102H

[137]

XIAO Z W, LEI H CH, ZHANG X, et al.. Ligand-hole in[SnI₆] unit and origin of band gap in photovoltaic perovskite variant Cs₂SnI₆[J]. Bulletin of the Chemical Society of Japan, 2015, 88(9):1250-1255. doi: 10.1246/bcsj.20150110

[138]

LEE B, STOUMPOS C C, ZHOU N J, et al.. Air-stable molecular semiconducting iodosalts for solar cell applications:Cs₂SnI₆ as a hole conductor[J]. Journal of the American Chemical Society, 2014, 136(43):15379-15385. doi: 10.1021/ja508464w

[139]

SAPAROV B, SUN J P, MENG W W, et al.. Thin-film deposition and characterization of a Sn-deficient perovskite derivative Cs₂SnI₆[J]. Chemistry of Materials, 2016, 28(7):2315-2322. doi: 10.1021/acs.chemmater.6b00433

[140]

SAKAI N, HAGHIGHIRAD A A, FILIP M R, et al.. Solution-processed cesium hexabromopalladate(Ⅳ), Cs₂PdBr₆, for optoelectronic applications[J]. Journal of the American Chemical Society, 2017, 139(17):6030-6033. doi: 10.1021/jacs.6b13258

[141]

MAUGHAN A E, GANOSE A M, BORDELON M M, et al.. Defect tolerance to intolerance in the vacancy-ordered double perovskite semiconductors Cs₂SnI₆ and Cs₂TeI₆[J]. Journal of the American Chemical Society, 2016, 138(27):8453-8464. doi: 10.1021/jacs.6b03207

[142]

DONALDSON L. Lead-free perovskites improve solar energy[J]. Materials Today, 2018, 21(5):460. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=cbf06fbedf4b145e44a8d2182c409106

[143]

TSAI H, NIE W Y, BLANCON J C, et al.. High-efficiency two-dimensional Ruddlesden Popper perovskite solar cells[J]. Nature, 2016, 536(7616):312-316. doi: 10.1038/nature18306

[144]

FRACCAROLLO A, CANTATORE V, BOSCHETTO G, et al.. Ab initio modeling of 2D layered organohalide lead perovskites[J]. The Journal of Chemical Physics, 2016, 144(16):164701. doi: 10.1063/1.4947305

[145]

BLANCON J C, TSAI H, NIE W, et al.. Extremely efficient internal exciton dissociation through edge states in layered 2D perovskites[J]. Science, 2017, 355(6331):1288-1292. doi: 10.1126/science.aal4211

[146]

LIAO J F, RAO H SH, CHEN B X, et al.. Dimension engineering on cesium lead iodide for efficient and stable perovskite solar cells[J]. Journal of Materials Chemistry A, 2017, 5(5):2066-2072. doi: 10.1039/C6TA09582H

[147]

HAMAGUCHI R, YOSHIZAWA-FUJITA M, MIYASAKA T, et al.. Formamidine and cesium-based quasi-two-dimensional perovskites as photovoltaic absorbers[J]. Chemical Communications, 2017, 53(31):4366-4369. doi: 10.1039/C7CC00921F

[148]

LIU Y Y, XIAO H, GODDARD Ⅲ W A. Two-dimensional halide perovskites:tuning electronic activities of defects[J]. Nano Letters, 2016, 16(5):3335-3340. doi: 10.1021/acs.nanolett.6b00964

[149]

MA L, DAI J, ZENG X CH. Two-dimensional single-layer organic inorganic hybrid perovskite semiconductors[J]. Advanced Energy Materials, 2017, 7(7):1601731. doi: 10.1002/aenm.201601731

[150]

ZHANG L, LIANG W ZH. How the structures and properties of two-dimensional layered perovskites MAPbI₃ and CsPbI₃ vary with the number of layers[J]. The Journal of Physical Chemistry Letters, 2017, 8(7):1517-1523. doi: 10.1021/acs.jpclett.6b03005

[151]

SHANG Q Y, WANG Y N, ZHONG Y G, et al.. Unveiling structurally engineered carrier dynamics in hybrid quasi-two-dimensional perovskite thin films toward controllable emission[J]. The Journal of Physical Chemistry Letters, 2017, 8(18):4431-4438. doi: 10.1021/acs.jpclett.7b01857

[152]

LIU J X, LENG J, WU K F, et al.. Observation of internal photoinduced electron and hole separation in hybrid two-dimentional perovskite films[J]. Journal of the American Chemical Society, 2017, 139(4):1432-1435. doi: 10.1021/jacs.6b12581

[153]

LIAO Y Q, LIU H F, ZHOU W J, et al.. Highly oriented low-dimensional tin halide perovskites with enhanced stability and photovoltaic performance[J]. Journal of the American Chemical Society, 2017, 139(19):6693-6699. doi: 10.1021/jacs.7b01815

[154]

CAO D H, STOUMPOS C C, YOKOYAMA T, et al.. Thin films and solar cells based on semiconducting two-dimensional Ruddlesden-Popper (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)_n-1Sn_nI_3n+1 Perovskites[J]. ACS Energy Letters, 2017, 2(5):982-990. doi: 10.1021/acsenergylett.7b00202

[155]

SAPAROV B, HONG F, SUN J P, et al.. Thin-film preparation and characterization of Cs₃Sb₂I₉:a lead-free layered perovskite semiconductor[J]. Chemistry of Materials, 2015, 27(16):5622-5632. doi: 10.1021/acs.chemmater.5b01989

[156]

PARK B W, PHILIPPE B, ZHANG X L, et al.. Bismuth based hybrid perovskites A₃Bi₂I₉(A:Methylammonium or Cesium) for solar cell application[J]. Advanced Materials, 2015, 27(43):6806-6813. doi: 10.1002/adma.201501978

[157]

OLDAG T, AUSSIEKER T, KELLER H L, et al.. Solvothermale synthese und bestimmung der kristallstrukturen von AgBiI₄ und Ag₃BiI₆[J]. Zeitschrift für Anorganische und Allgemeine Chemie, 2005, 631(4):677-682. doi: 10.1002/zaac.200400508

[158]

ZHANG ZH, LI X W, XIA X H, et al.. High-quality (CH₃NH₃)₃Bi₂I₉ film-based solar cells:pushing efficiency up to 1.64%[J]. The Journal of Physical Chemistry Letters, 2017, 8(17):4300-4307. doi: 10.1021/acs.jpclett.7b01952

[159]

BAI F, HU Y H, HU Y Q, et al.. Lead-free, air-stable ultrathin Cs₃Bi₂I₉ perovskite nanosheets for solar cells[J]. Solar Energy Materials and Solar Cells, 2018, 184:15-21. doi: 10.1016/j.solmat.2018.04.032

[160]

PAL J, MANNA S, MONDAL A, et al.. Colloidal synthesis and photophysics of M₃Sb₂I₉(M=Cs and Rb) nanocrystals:lead-free perovskites[J]. Angewandte Chemie International Edition, 2017, 56(45):14187-14191. doi: 10.1002/anie.201709040

[161]

JIANG F Y, YANG D W, JIANG Y Y, et al.. Chlorine-incorporation-induced formation of the layered phase for antimony-based lead-free perovskite solar cells[J]. Journal of the American Chemical Society, 2018, 140(3):1019-1027. doi: 10.1021/jacs.7b10739

[162]

JOHANSSON M B, ZHU H M, JOHANSSON E M J. Extended photo-conversion spectrum in low-toxic bismuth halide perovskite solar cells[J]. The Journal of Physical Chemistry Letters, 2016, 7(17):3467-3471. doi: 10.1021/acs.jpclett.6b01452

[163]

SANSOM H C, WHITEHEAD G F S, DYER M S, et al.. AgBiI₄ as a lead-free solar absorber with potential application in photovoltaics[J]. Chemistry of Materials, 2017, 29(4):1538-1549. doi: 10.1021/acs.chemmater.6b04135

[164]

XIAO Z W, MENG W W, MITZI D B, et al.. Crystal structure of AgBi₂I₇ thin films[J]. The Journal of Physical Chemistry Letters, 2016, 7(19):3903-3907. doi: 10.1021/acs.jpclett.6b01834

[165]

PAI N, LU J F, GENGENBACH T R, et al.. Silver bismuth sulfoiodide solar cells:tuning optoelectronic properties by sulfide modification for enhanced photovoltaic performance[J]. Advanced Energy Materials, 2019, 9(5):1803396.

[166]

MASHADIEVA L F, ALIEV Z S, SHEVELKOV A V, et al.. Experimental investigation of the Ag-Bi-I ternary system and thermodynamic properties of the ternary phases[J]. Journal of Alloys and Compounds, 2013, 551:512-520. doi: 10.1016/j.jallcom.2012.11.033

[167]

JU M G, CHEN M, ZHOU Y Y, et al.. Earth-abundant nontoxic titanium(Ⅳ)-based vacancy-ordered double perovskite halides with tunable 1.0 to 1.8 eV bandgaps for photovoltaic applications[J]. ACS Energy Letters, 2018, 3(2):297-304. doi: 10.1021/acsenergylett.7b01167