激光空间合束主镜优化设计与分析

汤伟; 刘立生; 刘扬; 邵俊峰; 郭劲; 汤伟; 刘立生; 刘扬; 邵俊峰; 郭劲

doi:10.3788/CO.2019-0161

[1]

FAN T Y. Laser beam combining for high-power, high-radiance sources[J]. IEEE Journal of Selected Topics in Quantum Electronics, 2005, 11(3): 567-577. doi: 10.1109/JSTQE.2005.850241

[2]

LEGER J R, NILSSON J, HUIGNARD J P, et al. Introduction to the issue on laser beam combining and fiber laser systems[J]. IEEE Journal of Selected Topics in Quantum Electronics, 2009, 15(2): 237-239. doi: 10.1109/JSTQE.2009.2015363

[3]

刘泽金, 周朴, 王小林, 等. 激光相干合成的历史、现状与发展趋势(邀请论文)[J]. 中国激光,2010,37(9):2221-2234. doi: 10.3788/CJL20103709.2221

LIU Z J, ZHOU P, WANG X L, et al. The history, development and tend of coherent combining of laser beams[J]. Chinese Journal of Lasers, 2010, 37(9): 2221-2234. (in Chinese) doi: 10.3788/CJL20103709.2221

[4]

MADASAMY P, LOFTUS T, THOMAS A, et al. Comparison of spectral beam combining approaches for high power fiber laser systems[J]. Proceedings of SPIE, 2008, 6952: 695207. doi: 10.1117/12.783147

[5]

SPRANGLE P, TING A, PENANO J, et al. Incoherent combining and atmospheric propagation of high-power fiber lasers for directed-energy applications[J]. IEEE Journal of Quantum Electronics, 2009, 45(2): 138-148. doi: 10.1109/JQE.2008.2002501

[6]

王富国, 杨洪波, 赵文兴, 等. 1.2 m SiC主镜轻量化设计与分析[J]. 光学精密工程,2009,17(1):85-91.

WANG F G, YANG H B, ZHAO W X, et al. Lightweight design and analysis of a 1.2 m SiC primary mirror[J]. Optics and Precision Engineering, 2009, 17(1): 85-91. (in Chinese)

[7]

王富国, 杨洪波, 杨飞, 等. 大口径主镜轴向支撑点位置优化分析[J]. 红外与激光工程,2007,36(6):877-880. doi: 10.3969/j.issn.1007-2276.2007.06.028

WANG F G, YANG H B, YANG F, et al. Optimization and analysis for the axis support points position of the large aperture mirrors[J]. Infrared and Laser Engineering, 2007, 36(6): 877-880. (in Chinese) doi: 10.3969/j.issn.1007-2276.2007.06.028

[8]

宫辉, 连华东. 大口径SiC反射镜背部筋板布局设计研究[J]. 航天返回与遥感,2009,30(2):56-61, 69. doi: 10.3969/j.issn.1009-8518.2009.02.009

GONG H, LIAN H D. Study on design of back ribs for large-aperture SiC mirror[J]. Spacecraft Recovery &Remote Sensing, 2009, 30(2): 56-61, 69. (in Chinese) doi: 10.3969/j.issn.1009-8518.2009.02.009

[9]

包奇红, 沙巍, 陈长征, 等. 中心支撑φ610 mm圆形主镜的超轻量化设计[J]. 光子学报,2016,45(9):0912007. doi: 10.3788/gzxb20164509.0912007

BAO Q H, SHA W, CHEN CH ZH, et al. Ultra-lightweight design of φ610 mm circular primary mirror supported in centre[J]. Acta Photonica Sinica, 2016, 45(9): 0912007. (in Chinese) doi: 10.3788/gzxb20164509.0912007

[10]

王克军. 天基大口径反射镜轻量化设计及复合支撑技术研究[D]. 长春: 中国科学院研究生院(长春光学精密机械与物理研究所), 2016.

WANG K J. Research on the lightweight design and compound support of the large-aperture mirror for space-based telescope[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 2016. (in Chinese)

[11]

汤伟, 郭劲, 邵俊峰, 等. 激光重频对脉冲非稳腔TEA CO₂激光远场传输特性的影响分析[J]. 红外与激光工程,2013,42(9):2380-2385. doi: 10.3969/j.issn.1007-2276.2013.09.015

TANG W, GUO J, SHAO J F, et al. Analysis of far-field characteristics with repetition frequency of TEA CO₂ laser[J]. Infrared and Laser Engineering, 2013, 42(9): 2380-2385. (in Chinese) doi: 10.3969/j.issn.1007-2276.2013.09.015

[12]

伞晓刚, 孙宁, 卓仁善, 等. 大口径光电经纬仪主反射镜支撑结构设计[J]. 光学精密工程,2013,21(12):3111-3117. doi: 10.3788/OPE.20132112.3111

SAN X G, SUN N, ZHUO R SH, et al. Design of supporting structure for primary mirror of large aperture theodolite[J]. Optics and Precision Engineering, 2013, 21(12): 3111-3117. (in Chinese) doi: 10.3788/OPE.20132112.3111