折转光管在光电瞄准系统中的应用

王旻; 余毅; 王春霞; 王旻; 余毅; 王春霞

doi:10.3788/CO.20120506.0618

[1] 金光,王家骐. 利用坐标变换推导经纬仪三轴误差[J]. 光学精密工程 ,1999,7(5):89-94. JIN G,WANG J Q. The three-error axis of theodolite with the utilization of the coordinate to the variation[J]. Opt. Precision Eng.,1999,7(5):89-94.(in Chinese) [2] 王家骐,金光,颜昌翔. 机载光电跟踪测量设备的目标定位误差分析[J]. 光学精密工程 ,2005,13(2):105-116. WANG J Q,JIN G,YAN CH X. Orientation error analysis of airborne opto-electric tracking and measuring device[J]. Opt. Precision Eng.,2005,13(2):105-116.(in Chinese) [3] 张明慧,张尧禹,乔彦峰. 车载双联光电瞄准系统的研究[J]. 光电工程 ,2004,31(7):18-23. ZHANG M H,ZHANG Y Y,QIAO Y F. Study on vehicle twin-photoelectrical pointing system[J]. Opto-electronic Eng.,2004,31(7):18-23.(in Chinese) [4] 欧同庚,陈志高,杨博雄,等. CCD光电自准直仪工作原理及误差源分析[J]. 大地测量与地球动力学 ,2007,6:98-100. OU T G,CHEN ZH G,YANG B X,et al.. Operating principle and error source of a new type of ccd photoelectric autocollimator[J]. J. Geodesy and Geodynamics,2007,6:98-100.(in Chinese) [5] 张强. 方位瞄准系统中折转光管的应用研究[J]. 应用光学 ,2008,29(4):512-517. ZHANG Q. Reflex light-tube in azimuth pointing system of missile[J]. J. Appl. Opt.,2008,29(4):512-517.(in Chinese) [6] 王家骐 . 光学仪器总体设计 .长春:中科院长春光学精密机械研究所,1998. WANG J Q. Design of optical instrument . Changchun:Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,1998.(in Chinese) [7] 张俊杰,李政阳. 直角棱镜用作自准直反光镜的光学特性[J]. 宇航计测技术 ,2009,29(4):1-4. ZHANG J J,LI ZH Y. The optical characteristics of right angle prisms as auto-collimating mirror[J]. J. Astronautic Metrology and Measurement,2009,29(4):1-4.(in Chinese) [8] 张磊,郭劲. 分体式激光扩束系统平行度测量装置的设计[J]. 光学精密工程 ,2012,20(4):789-795. ZHANG L,GUO J. Design of parallelism measuring equipment for laser beams from independent laser expanding beam system e[J]. Opt. Precision Eng.,2012,20(4):789-795.(in Chinese) [9] 刘磊. 轻型高稳定性离轴非球面平行光管设计[J]. 中国光学 ,2011,4(6):588-593. LIU L. Design of off-axis aspherical collimator with lightweight and high stability[J]. Chinese Optics,2011,4(6):588-593.(in Chinese) [10] 辛雪军,陈长征,张星祥,等. 平行光管主反射镜组件的非线性有限元分析[J]. 中国光学与应用光学 ,2010,3(2):170-176. XIN X J,CHEN CH ZH,ZHANG X X,et al.. Nonlinear analysis of primary mirror subassembly for collimator base on finite element method[J]. Chinese J. Opt. Appl. Opt.,2010,3(2):170-176.(in Chinese) [11] 任淑艳,张琢,刘国栋,等. 精密测量中激光成像系统散斑的抑制因素[J]. 光学精密工程 ,2007,15(3):331-336. REN SH Y,ZHANG ZH,LIU G D,et al.. Restraining speckle of laser imaging system in accurate measurement[J]. Opt. Precision Eng.,2007,15(3):331-336.(in Chinese) [12] 王旻,宋立维,乔彦峰,等. 外视场拼接测量系统的视场拼接和交汇测量算法及其实现[J]. 中国光学与应用光学 ,2010,3(3):229-238. WANG M,SONG L W,QIAO Y F,et al.. Convergence algorithm of field stitching and intersection measurement for external field stitching measuring system and its implementation[J]. Chinese J. Opt. Appl. Opt.,2010,3(3):229-238.(in Chinese)