高精度干涉仪针孔空间滤波器研制

张春雷; 向阳; 于长淞; 张春雷; 向阳; 于长淞

doi:10.3788/CO.20130606.952

[1] TEJNIL M E,GOLDBERG K A. Phase-shifting point diffraction interferometer[J]. Opt. Lett.,1996,20(19):1526-1528. [2] LAI K F,GALLATIN G,DE KERKHOF M,et al.. New paradigm in lens metrology for lithographic scanner:evaluation and exploration[J]. SPIE,2004,5377:160-170. [3] TORN F J,JUN K G,YASUSHI M,et al.. Portable phase measuring interferometer using Shack-Hartmann method[J]. SPIE,2003,5038:726-732. [4] 刘友强,曹银花,潘飞,等. 激光加工用半导体激光器的光束变换[J]. 光学精密工程,2012,20(3):455-461. LIU Y Q,CAO Y H,PAN F,et al.. Beam transformation of diode lasers used in laser processing[J]. Opt. Precision Eng.,2012,20(3):455-461.(in Chinese) [5] 李世文,张秋慧,牛瑞华. 激光对金属铜微孔加工的热力学过程研究[J]. 光谱学与光谱分析,2013,33(4):899-902. LI SH W,ZHANG Q H,ZHU R H. Thermodynamics process of laser drilling on copper surface[J]. Spectroscopy and Spectral Analysis,2013,33(4):899-902.(in Chinese) [6] 朱洪波,李艳华,郝明明,等. 基于偏振复用技术的新型半导体激光加工光纤耦合模块[J]. 光学精密工程,2013,21(5):1137-1143. ZHU H B,LI Y H,HAO M M,et al.. Fiber coupled diode laser module for laser processing by polarization multiplexing[J]. Opt. Precision Eng.,2013,21(5):1137-1143.(in Chinese) [7] 刘峰,彭国良,杜太焦,等. 切向气流对激光加热金属板非熔化穿孔效应的影响[J]. 中国光学,2013,6(3):332-342. LIU F,PENG G L,DU T J,et al.. Influence of tangential airflows on burn-through effect with no-melting of metal heated by laser[J]. Chinese Optics,2013,6(3):332-342.(in Chinese) [8] ZHANG J,PENG H Y,LIU Y,et al.. Fiber-coupled diode laser flexible processing source for metal sheet welding[J]. Chinese J. Luminescence,2012,33(8):895-900. [9] 于华杰,崔益民,王荣明. 聚焦离子束系统原理、应用及进展[J]. 电子显微学报,2008,27(3):243-248. YU H J,CUI Y M,WANG R M. Principle, application and development of focused ion beam system[J]. J. Chinese Electron Microscope Society,2008,27(3):243-248.(in Chinese) [10] 张继成,唐永建,吴卫东. 聚焦离子束系统在微米/纳米加工技术中的应用[J]. 材料导报,2006,20(增2):40-46. ZHANG J CH,TANG Y J,WU W D. Application of focused ion beam in micro/nanometer micromachining technology[J]. J. Materials,2006,20(supp 2):40-46.(in Chinese) [11] 张琨,林罡,刘刚,等. 电子束光刻技术的原理及其在微纳加工与纳米器件制备中的应用[J]. 电子显微学报,2006,25(2):97-103. ZHANG K,LIN G,LIU G,et al.. Principle of electron beam lithography and its application on the nanofabrication and nanodevice[J]. J. Chinese Electron Microscope Society,2006,25(2):97-103. [12] 齐克奇. 光刻物镜波像差检测平台针孔对准装置的研制[J]. 长春理工大学学报 (自然科学版),2012,35(4):46-48. QI K Q. Development of pinhole positioning device of wavefront aberration detecting stage for lithographic projection objective[J]. J. Changchun University of Science and Technology(Natural Science Edition),2012,35(4):46-48.(in Chinese) [13] 周孑民,朱再兴,谢东江,等. 常功率平面热源法测试耐火材料热物性的研究[J]. 中南大学学报,2011,42(5):467-1472. ZHOU J M,ZHU Z X,XIE D J,et al.. Thermal physical property of refractory material measured by plane heat source method with constant heat rate[J]. J. Central South University(Science and Technology),2011,42(5):467-1472.(in Chinese) [14] 伍德.光学材料的激光诱导损伤[M].崔旭东, 译.成都:西南交通大学出版社,2011:59. WOOD R M. Laser-induced Damage of Optical Materials[M]. CUI X D,Trans. Chengdu:Southwest Jiaotong University Press,2011:59. [15] 于长淞.点衍射干涉仪小孔掩模制备与检测技术研究[J]. 长春理工大学学报 (自然科学版),2012,35(4):24-26. YU C S. Research of preparation and detection technology of PDI pinhole mask[J]. J. Changchun University of Science and Technology(Natural Science Edition),2012,35(4):24-26.(in Chinese)