[1] 吴小霞, 王鸣浩, 明名, 等. 大口径SiC轻量化主镜热变形的定标[J]. 光学 精密工程, 2012, 20(6):1243-1249. WU X X, WANG M H, MING M, et al.. Calibration of thermal distortion for large aperture SiC lightweight mirror[J]. Opt. Precision Eng., 2012, 20(6):1243-1249. (in Chinese) [2] 王栋, 杨洪波, 陈长征. 光学表面面形的计算机仿真[J]. 计算机仿真, 2007, 24(2):298-301. WANG D, YANG H B, CHEN CH ZH. Computer Simulation of the Optical Surface[J]. Computer Simulation, 2007, 24(2):298-301.(in Chinese) [3] 张伟, 刘剑峰, 龙夫年, 等. 基于Zernike多项式进行波面拟合研究[J]. 光学技术, 2005, 31(5):675-678. ZHANG W, LIU J F, LONG F N, et al.. Study on wavefront fitting using Zernike polynomials[J]. Optical Technique, 2005, 31(5):675-678.(in Chinese) [4] TMT Group. Design Requirements Document for Tertiary Mirror System(M3S)[2012-07-25].[EB/OL].http://www.tmt.org/sites/default/files/documents/application/pdf/design%20requirments%20document%202012-07.pdf. [5] BELY P Y. The Design and Construction of Large Optical Telescopes[M]. Baltimore:Springer-Verlag, 2003. [6] 张媛, 敬畏, 程云涛, 等. Φ510 mm SiC超轻量化反射镜的设计与有限元分析[J]. 光学 精密工程, 2012, 20(8):1718-1724. ZHANG Y, JING W, CHENG Y T, et al.. Design and finite element analysis of Φ510 mm SiC ultra-lightweight mirror[J]. Opt. Precision Eng., 2012, 20(8):1718-1724.(in Chinese) [7] 林旭东, 刘欣悦, 王建立, 等. 137单元变形镜的性能测试即校正能力实验[J]. 光学 精密工程, 2013, 21(2):267-273. LIN X D, LIU X Y, WANG J L, et al.. Performent of correction capability of 137-element deformable mirror[J]. Opt. Precision Eng., 2013, 21(2):267-273.(in Chinese) [8] 张景旭. 地基大口径望远镜系统结构技术综述[J]. 中国光学, 2012, 5(4):327-336. ZHANG J X. Overview of structure of technologies of large aperture ground based telescope[J]. Chinese Optics, 2012, 5(4):327-336.(in Chinese) [9] 邓昌建. 基于似然函数的集成仪器可靠性估计[J]. 仪器仪表学报, 2011, 32(6):1414-1419. DENG CH J. Integrated instrument reliability based on quasi likelihood function[J]. Chinese J. Scientific Instrument, 2011, 32(6):1414-1419.(in Chinese) [10] 杨昌昊, 胡小健, 竺长安. 从故障树到故障贝叶斯网映射的故障诊断方法[J]. 仪器仪表学报, 2009, 30(7):1481-1486. YANG CH H, HU X J, ZHU CH A. Fault diagnosis method mapping from fault Bayesian networks[J]. Chinese J. Scientific Instrument, 2009, 30(7):1481-1486.(in Chinese) [11] 程景全.天文望远镜原理和设计[M]. 北京:中国科学技术出版社, 2003. CHENG J Q. Principles of Astronomical Telescope Design[M]. Beijing:China Science & Technology Press, 2003.(in Chinese) [12] TMT Group.Tertiary Mirror Surface Figure Specification.[2012-09-24].[EB/OL].http://www.tmt.org/sites/default/files/ documents/application/pdf/tmt%20-%20tertiary%20mirror%20suface%20figure%20specifications%2020121023.pdf. [13] DIERKING W. RMS Slope of Exponentially Correlated Surface Roughness for Radar Applications[J]. IEEE, 2000, 38(3):1451-1454. [14] 毕勇, 翟嘉, 吴金虎, 等. 一种光学仪器镜面面形的处理方法[J]. 光学技术, 2009, 35(1):10-17. BI Y, ZHAI J, WU J H, et al.. One method for mirror surface figure treatment in optical instrument[J]. Optical Technique, 2009, 35(1):10-17.(in Chinese)