| [1] |
[1] 韩德一,梁波. 惯性平台轴承预紧力及其刚度的计算分析[J]. 中国惯性技术学报,1998,6(4):38-60. HAN D Y,LIANG B. Analysis and computation on the preloaded force and stiffness of bearing fixed in the inertial platform[J]. J. Chinese Inertial Technology,1998,6(4):38-60.(in Chinese)
[2] ZVERV I,PYOUN Y S,LEE K B,et al.. An elastic deformation model of high speed spindles built into ball bearings[J]. J. Materials Processing Technology,2005,170(3):570-578.
[3] ALASRY A,ABEDI H. Kinematic and dynamic sensitivity analysis of a three-axis rotary table[J]. IEEE,2003 2:1147-1152.
[4] ALFARES M A,ELSHARKAWY A A. Effects of axial preloading of angular contact ball bearings on the dynamics of a grinding machine spindle system[J]. J. Materials Processing Technology,2003,136(1-3):48-59.
[5] 李朝辉,陈波. 月基对地观测跟踪转台设计与分析[J]. 光子学报,2010,39(12):2215-2219. LI ZH H,CHEN B. Development of lunar pointing mounts for imaging to the earth[J]. Acta Photonica Sinica,2010,39(12),2215-2219.(in Chinese)
[6] 王智,李朝辉. 月基极紫外相机光机结构设计[J]. 光学精密工程,2011,19(10):2427-2433. WANG ZH,LI ZH H. Optical-mechanical structure design for lunar-based extreme ultraviolet camera[J]. Opt. Precision Eng.,2011,19(10):2427-2433.(in Chinese)
[7] 王智. 基于碳纤维复合材料的月基极紫外相机照准架结构设计[J]. 中国光学,2012,5(6):590-595. WANG ZH. Design of CRFP collimation frame structure of lunar-based EUV camera[J]. Chinese Optics,2012,5(6):590-595.(in Chinese)
[8] 张景旭. 大型跟瞄架方位轴系的研制[J]. 光学精密工程,1996,4(2):73-77. ZHANG J X. Development of vertical axial system for large tracking and pointing mount[J]. Opt. Precision Eng.,1996,4(2):73-77.(in Chinese)
[9] 田学光,田兴志,刘轩,等. 大型精密转台高精度角度微驱动装置研制[J]. 光学精密工程,2010,18(5):1112-1118. TIAN X G,TIAN X ZH,LIU X,et al. Development of angular micro driving device for large-scale and high accurate turntable[J]. Opt. Precision Eng.,2010,18(5):1112-1118.(in Chinese)
[10] 李为民,王海涛. 轴向定位预紧轴承刚度计算[J]. 河北工业大学学报,2001,30(2):15-19. LI W M,WANG H T. Rigidity calculation of axial position preload bearings[J]. J. Hebei University of Technology,2001,30(2):15-19.(in Chinese)
[11] 郭向东,王燕霜. 轴承预紧力-系统固有频率及跨距关系的研究[J]. 轴承,2013,4:30-33. GUO X D,WANG Y SH. Research on relationship among bearing preload, system natural frequency and span[J]. Bearing,2013,4:30-33.(in Chinese)
[12] SHAN X B,XIE T,CHEN W SH. Novel approach for determining the optimal axial preload of a simulating rotary table spindle system[J]. J. Zhejiang University Science A,2007,8(5):812-817. |