[1] 胡伟,王莉,张振超,等.基于DSP的大口径天文望远镜伺服控制的设计与实现[J].微电机,2010,43(8):38-40. http://www.cnki.com.cn/Article/CJFDTOTAL-WDJZ201008009.htm

HU W,WANG L,ZHANG ZH CH. Design and implementation of servo control system of the large aperture telescope based on DSP[J]. Micro-Motor,2010,43(8):38-40.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-WDJZ201008009.htm
[2] 常九健.基于弧形电机拼接的大型望远镜驱动技术研究[D].成都:中国科学院光电技术研究所,2013.

CHANG J J. New direct drive method for large telescope base on Arc PMLSM[D]. Chengdu:The Institute of Optics and Electronics, Chinese Academy of Sciences, 2013.(in Chinese)
[3] 王国民.天文光学望远镜轴系驱动方式发展概述[J].天文学进展, 2007,25(4):364-374. http://www.cnki.com.cn/Article/CJFDTOTAL-TWJZ200704008.htm

WANG G M. Review of drive style for astronomical optical telescope[J]. Progress Astronomy,2007,25(4):364-374.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-TWJZ200704008.htm
[4] SVAREZ M. The GTC main axes servos and control system[C]. New York:Springer,2008:1-12.
[5] ERM T,GVTIERREZ P. Integration and tuning of the VLT drive systems[C]. New York:Springer,2003:490-499.
[6] TAKESHI N,WATARA T,TOSHIYUKI S,et al.. Telescope Control Systems Ⅲ. Hilton L,ed. Bellingham[J]. SPIE,1998:361-366.
[7] GILARDI G,SZETO K,HUARD S,et al.. Finite element analysis of the cogging force in the linear synchronous motorarray for the Thirty Meter Telescope[J]. Mechatronics,2011,21(3):116-124. http://cn.bing.com/academic/profile?id=2067735466&encoded=0&v=paper_preview&mkt=zh-cn
[8] MASANOR I,JELT W. Ground-based Telescopes, Oschmamn J M Jr, ed. Bellingham[J]. SPIE,2004:417-428. http://cn.bing.com/academic/profile?id=1992946145&encoded=0&v=paper_preview&mkt=zh-cn
[9] REN CH ZH,CHAO ZH ZH. One arc PMSM for telescope tracking system[J]. SPIE,2008,7012:70123O-8. http://cn.bing.com/academic/profile?id=2062917803&encoded=0&v=paper_preview&mkt=zh-cn
[10] CHANG J J,MA W L,HUANG J L. Design and optimization of arc permanent magnet synchronous motor used on large telescope[J]. IEEE Transactions on Magnetics,2012,48(5):1943-1947. doi: 10.1109/TMAG.2011.2173947
[11] 邓永停,李洪文,王建立,等.基于DSP和FPGA的望远镜伺服控制系统设计[J].红外与激光工程,2014,43(3):908-914. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201403043.htm

DENG Y T,LI H W,WANG J L,et al.. Design of telescope servo system based on DSP and FPGA[J]. Infrared and Laser Engineering,2014,43(3):908-914.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201403043.htm
[12] THOMPSON P M,MACMYNOWSKI D G,SIROTA M J. Analysis of the TMT mount control system[J]. SPIE,2008,7012:701260-7. http://cn.bing.com/academic/profile?id=1995435880&encoded=0&v=paper_preview&mkt=zh-cn
[13] 胡强晖,胡勤丰.全局滑模控制在永磁同步电机位置伺服中的应用[J].中国电机工程学报,2011,31(18):61-66. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC201118011.htm

HU Q H,HU Q F. Global sliding mode control for permanent magnet synchronous motor servo system[J]. Proceedings of the CSEE,2011,31(18):61-66.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC201118011.htm
[14] 方斯琛,周波.滑模控制的永磁同步电机伺服系统一体化设计[J].中国电机工程学报,2009,29(3):96-101. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC200903016.htm

FANG S CH,ZHOU B. Integrated design for permanent magnet synchronous motor servo systems based on sliding mode control[J]. Proceedings of the CSEE,2009,29(3):96-101.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC200903016.htm
[15] 张晓光,孙力,赵克.基于负载转矩滑模观测的永磁同步电机滑模控制[J].中国电机工程学报,2012,32(3):111-116. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC201203018.htm

ZHANG X G,SUN L,ZHAO K. Sliding mode control of PMSM based on a novel load torque sliding mode observer[J]. Proceedings of the CSEE,2012,32(3):111-116.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC201203018.htm
[16] 侯立民,张化光,刘秀翀.带ESO的自适应滑模调节的SPMSM自抗扰-无源控制[J].控制与决策,2010,25(11):1652-1656. http://www.cnki.com.cn/Article/CJFDTOTAL-KZYC201011012.htm

HOU L M,ZHANG H G,LIU Z CH. Adaptive sliding mode controller based on extended state observer of SPMSM with active disturbance rejection-passivity-based controller[J]. Control and Decision,2010,25(11):1652-1656.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-KZYC201011012.htm
[17] 王帅,陈涛,李洪文,等.光电伺服系统的频率特性测试与模型辨识[J].光学精密工程,2009,17(1):79-83. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM200901014.htm

WANG SH,CHEN T,LI H W,et al.. Frequency characteristic test and model identification for O-E tracking servo system[J]. Opt. Precision Eng.,2009,17(1):79-83.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM200901014.htm
[18] JUANG J N,PHAN M,HORTA L G,et al.. Identification of observer/kalman filter markov parameters:theory and experiments[J]. J. Guidance,Control and Dynamics,1993,16(2):320-329. doi: 10.2514/3.21006
[19] 刘丽兰,刘宏昭,吴子英,等.机械系统中摩擦模型的研究进展[J].力学进展,2008,38(2):201-212. http://www.cnki.com.cn/Article/CJFDTOTAL-LXJZ200802008.htm

LIU L L,LIU H ZH,WU Z Y,et al.. An overview of friction models in mechanical systems[J]. Advances in Mechanics,2008,38(2):201-212.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-LXJZ200802008.htm
[20] 刘承军,张辉,邹继斌.永磁同步电机齿槽定位力矩补偿[J].电工技术学报,2007,22(7):131-135. http://www.cnki.com.cn/Article/CJFDTOTAL-DGJS200707024.htm

LIU CH J,ZHANG H,ZOU J B. Compensation for the cogging torque of permanent magnet synchronous motors[J]. Transactions of China Electrotechnical Society,2007,22(7):131-135.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-DGJS200707024.htm