[1] 赵学颜, 李迎春. 靶场光学测量[D]. 北京: 装备指挥技术学院, 2001.

ZHAO X Y, LI Y CH. Range optical measurement[D]. Beijing:The Academy of Equipment Command & Technology, 2001. (in Chinese)
[2] 马品仲.大型天文望远镜设计和研究[J].应用光学, 1994, 15(3):6-11. http://www.cnki.com.cn/Article/CJFDTOTAL-JSJC200606098.htm

MA P ZH. Design and study on the large astronomical telescope[J]. Applied Optics, 1994, 15(3):6-11. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JSJC200606098.htm
[3] 杨佳林, 黄巧文.大口径反射镜结构参数优化设计[J].中国空间科学技术, 2011(4):77-33. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGKJ201104012.htm

YANG J L, HUANG Q W. Optimized design of structure parameters for large aperture mirrors[J]. Chinese Space Science and Technology, 2001(4):77-83. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGKJ201104012.htm
[4] 李福, 阮萍, 赵葆常.重力作用下平面反射镜变形研究[J].光子学报, 2005, 34(2):272-275. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB20050200T.htm

LI F, RUAN P, ZHAO B CH. Study on the surface deformation of flat reflector under gravity load[J]. Acta Photonica Sinica, 2005, 34(2):272-275. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB20050200T.htm
[5] 戴晓霖, 鲜浩, 唐金龙, 等. 8 m能动薄主镜侧支撑设计[J].光学学报, 2015, 35(6):255-262.

DAI X L, XIAN H, TANG J L, et al.. Designing of lateral support system for an 8 m active thin mirror[J]. Acta Optical Sinica, 2015, 35(6):255-262. (in Chinese)
[6] 邵亮, 吴小霞, 杨飞, 等. SiC轻量化主镜液压whiffletree支撑系统的改进[J].红外与激光工程, 2014, 43(11):3820-3824. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201411054.htm

SHAO L, WU X X, YANG F, et al.. Improvement on hydraulic whiffletree support system for SiC lightweight primary mirror[J]. Infrared & Laser Engineering, 2014, 43(11):3820-3824. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201411054.htm
[7] 伞晓刚, 孙宁, 卓仁善, 等.大口径光电经纬仪主反射镜支撑结构设计[J].光学精密工程, 2013, 21(12):3111-3117. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201312018.htm

SAN X G, SUN N, ZHUO R SH, et al.. Design of supporting structure for primary mirror of large aperture theodolite[J]. Optics and Precision Engineering, 2013, 21(12):3111-3117. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201312018.htm
[8] 李宗轩, 金光, 张雷, 等. 3.5 m口径空间望远镜单块式主镜技术展望[J].中国光学, 2014, 7(4):532-541. http://www.chineseoptics.net.cn/CN/abstract/abstract9165.shtml

LI Z X, JIN G, ZHANG L, et al.. Overview and outlook of monolithic primary mirror of spaceborne telescope with 3.5 m aperture[J].Chinese Optics, 2014, 7(4):532-541. (in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9165.shtml
[9] 张景旭.地基大口径望远镜系统结构技术综述[J].中国光学, 2012, 5(4):327-336. http://www.chineseoptics.net.cn/CN/abstract/abstract8856.shtml

ZHANG J X. Overview of structure technologies of large aperture ground-based telescopes[J].Chinese Optics, 2012, 5(4):327-336. (in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract8856.shtml
[10] 吴小霞, 杨洪波, 张景旭, 等.大口径球面镜支撑系统的优化设计[J].光子学报, 2009, 38(1):129-132. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200901028.htm

WU X X, YANG H B, ZHANG J X, et al.. Optimal design of support system for the large-aperture sphere mirror[J]. Acta Photonica Sinica, 2009, 38(1):129-132. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200901028.htm
[11] 王富国, 杨洪波, 杨飞, 等.大口径主镜轴向支撑点位置优化分析[J].红外与激光工程, 2007, 36(6):877-880. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ200706030.htm

WANG F G, Yang H B, YANG F, et al.. Optimization and analysis for the axis support points position of the large aperture mirrors[J]. Infrared & Laser Engineering, 2007, 36(6):877-880. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ200706030.htm
[12] 范李立, 张景旭, 姜皓, 等.极轴式望远镜主镜支撑设计[J].红外与激光工程, 2011, 40(3):476-479. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201201033.htm

FAN L, ZHANG J X, JIANG H, et al.. Design of the primary mirror support of equatorial telescope[J]. Infrared & Laser Engineering, 2011, 40(3):476-479. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201201033.htm
[13] 庄茁, 由小川, 廖剑晖, 等.基于ABAQUS的有限元分析和应用[M].北京:清华大学出版社, 2011.

ZHUANG ZH, YOU X CH, LIAO J H, et al.. Based on ABAQUS finite element analysis and application[M]. Beijing:Tsinghua Unversity Press, 2011. (in Chinese)
[14] 谢军, 曹立华, 韩光宇, 等.考虑接触边界条件的经纬仪主镜面形误差分析[J].光子学报, 2014, 43(12):1212004. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201412025.htm

XIE J, CAO L H, HAN G Y, et al.. The surface error analysis of theodolite primary mirror considering boundary condition[J]. Acta Photonica Sinica, 2014, 43(12):1212004. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201412025.htm
[15] 邵亮, 吴小霞, 陈宝刚, 等. SiC轻量化主镜的被动支撑系统[J].光学精密工程, 2015, 23(5):1380-1386. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201505023.htm

SHAO L, WU X X, CHEN B G, et al.. Passive support system of light-weighted SiC primary mirror[J]. Optics and Precision Engineering, 2015, 23(5):1380-1386. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201505023.htm