[1] 潘其坤.中红外固体激光器研究进展[J].中国光学, 2015(4):557-566. http://www.chineseoptics.net.cn/CN/abstract/abstract9321.shtml

PAN Q K. Progress of mid-infrared solid-state laser[J]. Chinese Optics, 2015(4):557-566.(in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9321.shtml
[2] 王立军, 宁永强, 秦莉, 等.大功率半导体激光器研究进展[J].发光学报, 2015, 36(1):1-19. http://www.cnki.com.cn/Article/CJFDTOTAL-FGXB201501002.htm

WANG L J, NING Y Q, QIN L, et al.. Development of high power diode laser[J]. Chinese J. Luminescence, 2015, 36(1):1-19.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-FGXB201501002.htm
[3] 李思忠. 强激光热辐射条件下复合材料结构的破坏[C]. 激光的热和力学效应学术会议论文集, 北京, 1993: 100-109.

LI S ZH. Structural damage of composites under high power laser irradiation[C]. Proceedings of the Academic Conference on the Thermal and Mechanical Effects of Laser, 1993:100-109.(in Chinese)
[4] 彭国良, 张相华, 高银军, 等.激光辐照玻璃纤维/环氧树脂复合材料的力学剥蚀研究[J].中国激光, 2015, 8(1):205-211. http://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201501028.htm

PENG G L, ZHANG X H, GAO Y J, et al.. Research to mechanics erosion effect of laser irradiating glass/epoxy composites[J]. Chinese J. Lasers, 2015, 8(1):205-211.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201501028.htm
[5] 张家雷, 王伟平, 刘仓理.激光辐照下复合材料热响应的轴对称数值分析[J].强激光与粒子束, 2014, 26(9):132-136. http://www.cnki.com.cn/Article/CJFDTOTAL-QJGY201409026.htm

ZHANG J L, WANG W P, LIU C L. Axisymmetric numerical study on thermal response of composites of laser irradiation[J]. High Power Laser and Particle Beams, 2014, 26(9):132-136.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-QJGY201409026.htm
[6] SAGAR S. Comprehensive ablation characteristics of ceramic fibers impregnated rubber composites[J]. Polymer Engineering & Science, 2014, 6:162-167.. https://www.researchgate.net/publication/272793034_Comprehensive_Ablation_Characteristics_of_Ceramic_Fibers_Impregnated_Rubber_Composites
[7] DING J, HUANG Z, QIN Y, et al.. Improved ablation resistance of carbon phenolic composites by introducing zirconium silicide particles[J]. Composites Part B Engineering, 2015, 82:100-107. doi: 10.1016/j.compositesb.2015.08.023
[8] BIAN L, XIAO J, ZENG J, et al.. Microstructural interpretation of the ablative properties of phenolic quartz hybrid fabric reinforced phenolic resin composites[J]. Materials & Design, 2014, 62(10):424-429. https://www.researchgate.net/publication/275299328_Microstructural_interpretation_of_the_ablative_properties_of_phenolic-quartz_hybrid_fabric_reinforced_phenolic_resin_composites
[9] 穆景阳. Cf/E复合材料的重频激光烧蚀机理及加固涂层研究[D]. 湖南: 国防科学技术大学, 2007.

MU J Y. Studies on the ablative mechanism of Cf/E irradiated by Re-frequency laser and anti-laser coatings[D]. Hunan:National University of Defense Technology, 2007.(in Chinese)
[10] HIROGAKI T, AOYAMA E, INOUE H, et al.. Laser drilling of blind via holes in aramid and glass/epoxy composites for multi-layer printed wiring boards[J]. Composites:Part A, 2001, 32:963-968. doi: 10.1016/S1359-835X(00)00152-4
[11] 万红, 胡凯为, 穆景阳, 等.树脂基复合材料在连续激光作用下的损伤[J].强激光与粒子束, 2008, 20(1):6-10. http://www.cnki.com.cn/Article/CJFDTOTAL-QJGY200801002.htm

WAN H, HU K W, MU J Y, et al. Damage analysis of fiber reinforced resin matrix composites irradiated by CW laser[J]. High Power Laser and Particle Beams, 2008, 20(1):6-10.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-QJGY200801002.htm
[12] 张永强, 王贵兵, 唐小松, 等.两种纤维增强复合材料连续激光烧蚀阈值测量及吸收特性分析[J].强激光与粒子束, 2009, 21(2):199-202. http://www.cnki.com.cn/Article/CJFDTOTAL-QJGY200902008.htm

ZHANG Y Q, WANG G B, TANG X S, et al.. Ablation threshold measurement and absorption characteristic analysis of two fiber reinforced composites irradiated by CW laser[J]. High Power Laser and Particle Beams, 2009, 21(2):199-202.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-QJGY200902008.htm
[13] LI J, GUAN Z W, ZHANG Y Z, et al. Laser ablation resistance behavior of organosilicone composite coating on various substrates[J]. Materials Science Forum, 2014, 789(789):461-465. https://www.researchgate.net/publication/269357656_Laser_Ablation_Resistance_Behavior_of_Organosilicone_Composite_Coating_on_Various_Substrates
[14] 陈博, 万红, 白书欣.石墨改性环氧树脂抗强激光辐照性能[J].强激光与粒子束, 2011, 23(10):2617-2620. doi: 10.3788/HPLPB

CHEN B, WAN H, BAI SH X, et al.. Laser resistance capability of graphite modified epoxy resin[J]. High Power Laser and Particle Beams, 2011, 23(10):2617-2620.(in Chinese) doi: 10.3788/HPLPB
[15] 于庆春, 万红.片状石墨增强树脂基复合材料的耐激光烧蚀性能研究[J].无机材料学报, 2012, 27(2):157-161. doi: 10.3724/SP.J.1077.2012.00157

YU Q CH, WAN H. Ablation capability of flake graphite reinforced barium-phenolic resin composite under long pulse laser irradiation[J]. J. Inorganic Materials, 2012, 27(2):157-161.(in Chinese) doi: 10.3724/SP.J.1077.2012.00157
[16] 周德凤, 谢海明, 赵艳玲, 等.酚醛树脂热解炭材料的石墨化程度及其电化学性能[J].功能材料, 2005, 36(1):83-85. http://www.cnki.com.cn/Article/CJFDTOTAL-GNCL20050100O.htm

ZHOU D F, XIE H M, ZHAO Y L, et al.. Graphitizing degree and electrochemical properties of carbonaceous material by phenolic resin pyrolyzing[J]. Functional Materials, 2005, 36(1):83-85.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GNCL20050100O.htm