光学微透镜阵列模压成形研究进展与展望

周天丰; 解加庆; 梁志强; 刘欣; 刘晓华; 王西彬; 周天丰; 解加庆; 梁志强; 刘欣; 刘晓华; 王西彬

doi:10.3788/CO.20171005.0603

[1]

CHOI K, KIM J, LIM Y, et al.. Full parallax viewing-angle enhanced computer-generated holographic 3D display system using integral lens array[J]. Optics Express, 2005, 13(26):10494-502. doi: 10.1364/OPEX.13.010494

[2]

KIM D H, ERDENDBAT M U, KWON K C, et al.. Real-time 3D display system based on computer-generated integral imaging technique using enhanced ISPP for hexagonal lens array[J]. Applied Optics, 2013, 52(34):8411-8. doi: 10.1364/AO.52.008411

[3]

KIM Y, PARK J H, CHOI H, et al.. 53.4:Viewing-angle-enhanced 3-D integral imaging system using a curved lens array[J]. Optics Express, 2004, 12(3):421-9. doi: 10.1364/OPEX.12.000421

[4]

KHANNA H K, SHARMA D D, LAROIYA S C. Microlens arrays for integral imaging system[J]. Applied Optics, 2006, 45(36):9066-78. doi: 10.1364/AO.45.009066

[5]

彭玉颜, 周雄图, 张永爱, 等.用于集成成像3D显示的曲面微透镜阵列设计与仿真[J].光子学报, 2016, 45(3):149-154. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201603027.htm

PENG Y Y, ZHOU X T, ZHANG Y A, et al.. Design and simulation of curved microlens array for integral imaging 3D display[J]. Acta Photonica Sinica, 2016, 45(3):149-154.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201603027.htm

[6]

袁艳, 周宇, 胡煌华.光场相机中微透镜阵列与探测器配准误差分析[J].光子学报, 2010, 39(1):123-126. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201001030.htm

YUAN Y, ZHOU Y, HU H H. Registration error analysis for microlens array and photosonser in light field camera[J]. Acta Photonica Sinica, 2010, 39(1):123-126.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201001030.htm

[7]

钟可君, 高益庆, 李凤, 等.微透镜阵列提高LED多芯片封装取光效率的仿真[J].半导体光电, 2013, 34(3):432-435. http://www.cnki.com.cn/Article/CJFDTOTAL-BDTG201303020.htm

ZHONG K J, GAO Y Q, LI F, et al.. Simulation on enhancement of light extraction efficiency of multi-chips LED array package with micro-lens array[J]. Semiconductor Optoelectronics, 2013, 34(3):432-435.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-BDTG201303020.htm

[8]

崔崧, 高应俊, 阮驰, 等.一种新型微透镜阵列成象式投影光刻系统的研究[J].光子学报, 2002, 31(6):769-773. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200206029.htm

CUI S, GAO Y J, RUAN CH, et al.. A microlens projection photolithographic system[J]. Acta Photonica Sinica, 2002, 31(6):769-773.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200206029.htm

[9]

庄孝磊, 周芳, 陈林森.微透镜阵列光扩散片特性研究及制备[J].苏州大学学报:自然科学版, 2009, 25(4):48-52. http://www.cnki.com.cn/Article/CJFDTOTAL-SDXK200904011.htm

ZHUANG X L, ZHOU F, CHEN L S. The research of micro-lens array diffuser and its fabrication[J]. J. Suzhou University:Natural Science Edition, 2009, 25(4):48-52.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-SDXK200904011.htm

[10]

陈四海, 李毅.衍射微透镜阵列的光学性能研究及测试[J].激光与光电子学进展, 2000, 6:13-18. http://www.cnki.com.cn/Article/CJFDTOTAL-JGDJ200006003.htm

CHEN S H, LI Y. Optical properties theory and measurement of diffractive microlens arrays[J]. Laser & Optronics Progress, 2000, 6:13-18.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JGDJ200006003.htm

[11]

殷智勇, 汪岳峰, 贾文武, 等.基于微透镜阵列光束均匀化的傅里叶分析[J].激光与红外, 2012, 42(2):119-123. http://www.cnki.com.cn/Article/CJFDTOTAL-JGHW201202002.htm

YIN ZH Y, WANG Y F, JIA W W, et al.. Fourier analysis of light beam uniformity based on the microlens array[J]. Laser & Infrared, 2012, 42(2):119-123.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JGHW201202002.htm

[12]

刘志辉, 杨欢, 石振东, 等.衍射微透镜阵列用于面阵半导体激光光束匀化[J].中国激光, 2014(1):21-25. http://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201401005.htm

LIU ZH H, YANG H, SHI ZH D, et al.. Homogenization of the semiconductor laser planar array using diffractive microlens array[J]. Chinese J. Lasers, 2014(1):21-25.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ201401005.htm

[13]

于双双, 史宣, 杜吉, 等.基于二维微透镜阵列增大手术显微镜出瞳直径方法研究[J].红外与激光工程, 2014, 43(10):3342-3346. doi: 10.3969/j.issn.1007-2276.2014.10.030

YU SH SH, SHI X, DU J, et al.. 2D microlens array-based surgical microscope in optical system's exit pupil expander[J]. Infrared and Laser Engineering, 2014, 43(10):3342-3346.(in Chinese) doi: 10.3969/j.issn.1007-2276.2014.10.030

[14]

BACHMANN F, LOOSEN P, POPRAWE R. High Power Diode Lasers[M]. New York:Springer, 2007.

[15]

SUN H. Laser diode beam basics, manipulations and characterizations[J]. Springerbriefs in Physics, 2012. doi: 10.1007/978-94-007-4664-0

[16]

张占强, 张岩.基于微透镜阵列的光场成像系统[J].首都师范大学学报(自然科学版), 2016, 37(1):15-19. http://youxian.cnki.com.cn/yxdetail.aspx?filename=ZGGA201710007&dbname=CJFDPREP

ZHANG ZH Q, ZHANG Y. Light field imaging with micro lens array[J]. J. Capital Normal University(Natural Sciences Edition), 2016, 37(1):15-19.(in Chinese) http://youxian.cnki.com.cn/yxdetail.aspx?filename=ZGGA201710007&dbname=CJFDPREP

[17]

张健, 辛悦, 刘伟奇, 等.基于微透镜阵列的三维数字成像[J].光学精密工程, 2009, 7(7):1701-1706. http://youxian.cnki.com.cn/yxdetail.aspx?filename=GXXB20170920008&dbname=CAPJ2015

ZHANG J, XIN Y, LIU W Q, et al.. Three-dimensional digital imaging based on microlens array[J]. Opt.d Precision Eng., 2009, 7(7):1701-1706.(in Chinese) http://youxian.cnki.com.cn/yxdetail.aspx?filename=GXXB20170920008&dbname=CAPJ2015

[18]

郝劲波, 忽满利, 李林森, 等.基于微透镜阵列的实时三维物体识别[J].光子学报, 2007, 36(11):2008-2012. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200711011.htm

HAO J B, HU M L, LI L, et al.. Real-time three-dimensional object recognition with microlens array[J]. Acta Photonica Sinica, 2007, 36(11):2008-2012.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200711011.htm

[19]

YUAN Y, ZHOU Y, HUANG-HUA H U. Registration error analysis for microlens array and photosonser in light field camera[J]. Guangzi Xuebao/acta Photonica Sinica, 2010, 39(1):123-126. doi: 10.3788/gzxb

[20]

刘倩. 基于微透镜阵列的红外多目标/背景复合系统研究[D]. 哈尔滨: 哈尔滨工业大学, 2014. http://cdmd.cnki.com.cn/Article/CDMD-10213-1014083075.htm

LIU Q. Research on infraed multi-target and background compounding system based on microlens array[D]. Harbin:Harbin Institute of Technology, 2014.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10213-1014083075.htm

[21]

HUANG C, CHEN H, LI J, et al.. System design and description of infrared simulator system based on the multidimensional flight table[J]. SPIE, 2008, 7276:72760M-72760M-8. http://adsabs.harvard.edu/abs/2008SPIE.7276E..21H

[22]

SAXENA K, JAIN V K, MEHTA D S. A review on the light extraction techniques in organic electroluminescent devices[J]. Optical Materials, 2009, 32(1):221-233. doi: 10.1016/j.optmat.2009.07.014

[23]

kwon h, yee y, jeong c h, et al.. A high-sag microlens array film with a full fill factor and its application to organic light emitting diodes[J]. J. Micromechanics & Microengineering, 2008, 18(6):1192-1192. http://oz.nthu.edu.tw/~d9511814/samid/uTAS2007-2EK5P.pdf

[24]

PENG H, HO Y L, YU X J, et al.. Coupling efficiency enhancement in organic light-emitting devices using microlens array-theory and experiment[J]. J. Display Technology, 2005, 1(2):278-282. doi: 10.1109/JDT.2005.858944

[25]

蒋小平, 刘德森, 张凤军, 等.一种掩埋式复眼微透镜阵列[J].光电子·激光, 2011, 23(8):1143-1146. http://www.cnki.com.cn/Article/CJFDTOTAL-GDZJ201108007.htm

JIANG X P, LIU D S, ZHANG F J, et al.. A compound eye simulated by buried microlens array[J]. J. Optoelectronics & Laser, 2011, 23(8):1143-1146.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GDZJ201108007.htm

[26]

李向红. 新型仿生复眼制备及测试研究[D]. 中北大学, 2013. http://cdmd.cnki.com.cn/Article/CDMD-10110-1013184424.htm

LI X H. Manufacturing and testing research of new bionic compound eyes[D]. North University of China, 2013.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10110-1013184424.htm

[27]

杨元华, 陈时锦, 程凯, 等.超精密机械加工技术在微光学元件制造中的应用[J].航空精密制造技术, 2005, 4:10-12. doi: 10.3969/j.issn.1003-5451.2005.01.003

YANG Y H, CHEN SH J, CHENG K, et al.. Application of ultra precision machining to the manufacture of micro-optical components[J]. Aviation Precision Manufacturing Technology, 2005, 4:10-12.(in Chinese) doi: 10.3969/j.issn.1003-5451.2005.01.003

[28]

BRINKSMEIER E, PREUSS W, SCHMUTZ J. Manufacturing of microstruc-tures by diamondmachiningin Progress in Precision Engineering andNanotechnology[C], Proc.9th Int. Proc. Engng. Seminar, Braunschweig, Germany 1997:503-507.

[29]

CHOU S Y, KRAUSS P R, RENSTROM P J. Imprint of sub-25nm vias and trenches in polymer[J]. Applied Physics Letters, 1995, 67(21):3114-3116. doi: 10.1063/1.114851

[30]

ISHⅡ Y, TANIGUCHI J. Fabrication of three-dimensional nanoimprint mold usinginorganic resist in low accelerating voltage electron beam lithography[J]. Microelectronic Engineering, 2007, 84(5):912-915. https://www.intechopen.com/books/lithography/three-dimensional-nanoimprint-lithography-using-inorganic-electron-beam-resist

[31]

REINSPACH J, LINDBLOM M, VON HOFSTEN O, et al.. Cold-developed e-beam-patterned ZEP 7000 for fabrication of 13 nm nickel zone plates[J]. J. Vacuum Science & Technology, 2009, 27(6):2593-2596. http://www.nature.com/cited/cited.html?doi=10.1038/nature03719

[32]

佟军民, 胡松, 董小春, 等.工件台移动直线性对掩模移动曝光的影响[J].光电工程, 2007, 34(11):55-60. doi: 10.3969/j.issn.1003-501X.2007.11.012

TONG J M, HU S, DONG X CH, et al.. Effect of stage moving linear error on exposure in mask moving technique[J]. Opto-Electronic Engineering, 2007, 34(11):55-60.(in Chinese) doi: 10.3969/j.issn.1003-501X.2007.11.012

[33]

阎嫦玲, 鲁平, 刘德明, 等.与光纤阵列耦合的微透镜阵列设计与损耗分析[J].光电子·激光, 2006, 17(9):1043-1047. http://www.cnki.com.cn/Article/CJFDTOTAL-GDZJ200609003.htm

YAN C L, LU P, LIU D M, et al.. Design of micro lens arrays coupling with fiber arrays and analysis of the coupling loss[J]. J. Optoelectronics·Laser, 2006, 17(9):1043-1047.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GDZJ200609003.htm

[34]

SMITH H I, SPEARS D L, BERNACKI S E. X-ray lithography:a complementary techniqueto electron beam lithography[J]. J. Vacuum Science and Technology, 1973, 10(6):913-917. doi: 10.1116/1.1318514

[35]

JUNARSA I, NEALEY P F. Fabrication of masters for nanoimprint, step and flash, and soft lithography using hydrogen silsesquioxane and X-ray lithography[J]. J. Vacuum Science & Technology, 2004, 22(6):2685-2690.

[36]

LIU L, LOH N H, TAY B Y, et al.. Preparation and characterization of micro components fabricated by micro powder injection molding[J]. Materials Characterization 2011, 62(6):615-620. doi: 10.1016/j.matchar.2011.04.009

[37]

YI A Y, JAIN A. Compression molding of aspherical glass lenses-a combined experimental and numerical analysis[J]. J. American Ceramic Society, 2005; 88(3):579-586. doi: 10.1111/jace.2005.88.issue-3

[38]

KOLAŘÍK J, PEGORETTI A. Proposal of the Boltzmann-like superposition principle for nonlinear tensile creep of thermoplastics[J]. Polymer Testing, 2008, 27(5):596-606. doi: 10.1016/j.polymertesting.2008.03.002

[39]

BARBERO E J. Time-temperature-age superposition principle for predicting long-term response of linear viscoelastic materials-creep and fatigue in polymer matrix composites-2[J]. Creep & Fatigue in Polymer Matrix Composites, 2011:48-69. https://search.library.utoronto.ca/details?7409915

[40]

JALOCHA D, CONSTANTINESCU A, NEVIERE R. Revisiting the identification of generalized Maxwell models from experimental results[J]. International J. Solids & Structures, 2015, 67:169-181. http://www.doc88.com/p-7458222346493.html

[41]

张勇, 张斌珍, 吴淑娟, 等.主光轴平行于基底的微透镜阵列制作与测试[J].微纳电子技术, 2013, 50(1):47-51. http://www.cnki.com.cn/Article/CJFDTOTAL-GDZJ201405007.htm

ZHANG Y, ZHANG B ZH, WU SH J, et al.. Fabrication and measurement of microlens arrays with primary optical axis paralleled to wafers[J]. Micronanoelectronic Technology, 2013, 50(1):47-51.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GDZJ201405007.htm

[42]

YAN X, YANG J, XUE B, et al.. Design of the microlens arrays coupling with imaging fiber bundle[J]. Optoelectronics Letters, 2013, 9:169-172. doi: 10.1007/s11801-013-3016-4

[43]

CHEN W, ZHANG X, LIU X, et al.. Optical design and simulation of a compact multi-aperture camera based on a freeform microlens array[J]. Optics Communications, 2015, 338:300-306. doi: 10.1016/j.optcom.2014.10.029

[44]

柯才军. 微透镜阵列的设, 计制作及与CCD的集成技术[D]. 华中科技大学, 2005. http://cdmd.cnki.com.cn/Article/CDMD-10487-2006041217.htm

KE C J. Research on design, fabrication of microlens array and integration between microlens arrays and CCD image sensors[D]. Huazhong University of Science & Technology, 2005.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10487-2006041217.htm

[45]

TREMAIN D E, MEI K K. Application of the unimoment method to scattering from periodic surfaces[J]. J. Opt. Soc. Am., 1978, 68(6):775-783. doi: 10.1364/JOSA.68.000775

[46]

PENG S T, TAMIR T, BERTONI H L. Theory of periodic dielectric waveguides[J]. IEEE Trans. Microwave Theory Tech., 1975, 23(1):123-133. doi: 10.1109/TMTT.1975.1128513

[47]

MOHARAM M G, GAYLORD T K. Rigorous coupled-wave analysis of planar grating diffraction[J]. J. Opt. Soc. Am., 1981, 71(7):811-818. doi: 10.1364/JOSA.71.000811

[48]

唐勇, 李玉瑶.ZEMAX在光学设计外形尺寸计算中的应用[J].长春理工大学学报, 2009(2):193-196. http://www.cnki.com.cn/Article/CJFDTOTAL-CGJM200902005.htm

TANG Y, LI Y Y. ZEMAX's application in dimension calculation of optical design[J]. J. Changchun University of Science and Technology(Natural Science Edition), 2009(2):193-196.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-CGJM200902005.htm

[49]

LI L, ALLEN Y Y. Design and fabrication of a freeform microlens array for a compact large-field-of-view compound-eye camera[J]. Applied Optics, 2012, 51(12):1843-1852. doi: 10.1364/AO.51.001843

[50]

ZHOU T F, YAN J W, MASUDA J, et al.. Ultraprecision mass fabrication of aspherical fresnel lens by glass molding press[J]. Advanced Materials Research, 2011, 325:713-718. doi: 10.4028/www.scientific.net/AMR.325

[51]

ZHOU T, YAN J, MASUDA J, et al.. Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process[J]. J. Materials Processing Technology, 2009, 209(9):4484-4489. doi: 10.1016/j.jmatprotec.2008.10.030

[52]

GMP TOSHIBA MACHINE. http://www.toshiba-machine.co.jp/cn/product/nano/lineup/gmp/index.html[EB/OL] [2016-08-15].

[53]

尹韶辉, 张乐贤, 陈逢军, 等.小口径非球面加工技术及装备综述[J].光学技术, 2013, 2:103-111. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJS201302004.htm

YIN SH H, ZHANG X L, CHEN F J, et al.. Review of mechining technology and equipment foe small aspheric surface[J]. Optical Technology, 2013, 2:103-111.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GXJS201302004.htm

[54]

尹韶辉, 王玉方, 朱科军, 等.微小非球面玻璃透镜超精密模压成型数值模拟[J].光子学报, 2010, 39(11):2020-2024. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201011022.htm

YIN SH H, WANG Y F, ZHU K J, et al.. Numerical simulation of ultraprecision glass molding for micro aspherical glass lens[J]. Acta Photonica Sinica, 2010, 39(11):2020-2024.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201011022.htm

[55]

YI A Y, JAIN A. Compression molding of aspherical glass lenses-a combined experimental and numerical analysis[J]. J. American Ceramic Society, 2005, 88(3):579-586. doi: 10.1111/jace.2005.88.issue-3

[56]

KOLAŘÍK J, PEGORETTI A. Proposal of the Boltzmann-like superposition principle for nonlinear tensile creep of thermoplastics[J]. Polymer Testing, 2008, 27(5):596-606. doi: 10.1016/j.polymertesting.2008.03.002

[57]

OHARA CORPORATION.http://www.ohara-inc.co.jp/jp/product/electronics/index.html[EB/OL].[2016-08-01].

[58]

株式会社住田光学ガラスhttp://www.sumita-opt.co.jp/ja/[EB/OL]. [2016-08-10].

[59]

BARBERO E J. 2-Time-temperature-age superposition principle for predicting long-term response of linear viscoelastic materials[J]. Creep & Fatigue in Polymer Matrix Composites, 2011:48-69.

[60]

JALOCHA D, CONSTANTINESCU A, NEVIERE R. Revisiting the identification of generalized Maxwell models from experimental results[J]. International J. Solids & Structures, 2015, 67:169-181. http://www.doc88.com/p-7458222346493.html

[61]

HAYAT T, KHAN M, ASGHAR S. On the MHD flow of fractional generalized Burgers' fluid with modified Darcy's law[J]. Acta Mechanica Sinica, 2007, 23(3):257-261. doi: 10.1007/s10409-007-0078-1

[62]

ANURAG J, YI A Y. Numerical modeling of viscoelastic stress relaxation during glass lens forming process[J]. J. American Ceramic Society, 2005, 88(88):530-535.

[63]

LIPATOV Y S. Viscoelasticity of polymeric composites containing dispersed and fibrous fillers[J]. Mechanics of Composite Materials, 1981, 16(5):541-553. doi: 10.1007/BF00610179

[64]

YAN J, OOWADA T, ZHOU T, et al.. Precision machining of microstructures on electroless-plated NiP surface for molding glass components[J]. J. Materials Processing Technology, 2009, 209(10):4802-4808. doi: 10.1016/j.jmatprotec.2008.12.008

[65]

ZHOU T, YAN J, MASUDA J, et al.. Investigation on shape transferability in ultraprecision glass molding press for microgrooves[J]. Precision Engineering, 2011, 35(2):214-220. doi: 10.1016/j.precisioneng.2010.09.011

[66]

关佳亮, 陈志德, 曹成国, 等.大直径菲涅尔透镜模具加工发展现状及展望[J].机械设计与制造, 2012, 8:37-40. doi: 10.3969/j.issn.1001-3997.2012.02.015

GUAN J L, CHEN ZH D, CAO CH G, et al.. Development status and prospects of large diameter Fresnel lens mould machining[J]. Manufacturing Technology & Machine Tool, 2012, 8:37-40. (in Chinese) doi: 10.3969/j.issn.1001-3997.2012.02.015

[67]

王泽彪. 微小非球面碳化钨模具的斜轴磨削及超声抛光工艺研究[D]. 长沙: 湖南大学, 2011. http://cdmd.cnki.com.cn/Article/CDMD-10532-1013171214.htm

WANG Z B. Inclined axis grinding for WC micro aspheric mould and ultrasonic vibration assisted finishing properties study[D]. Changsha:Hunan Uinversity, 2011.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10532-1013171214.htm

[68]

CARDARELLI F. Materials handbook:a concise desktop reference[J]. Materials & Design, 2001, 22(3):237-237. http://www.springer.com/us/book/9781846286681

[69]

FIRESTONE G C, YI A Y. Precision compression molding of glass microlenses and microlens arrays-an experimental study[J]. Applied Optics, 2005, 44(29):6115-22. doi: 10.1364/AO.44.006115

[70]

王美成, 廖广兰, 史铁林.小型非球面光学元件测量技术研究[J].计测技术, 2007, 27(4):1-4. http://www.cnki.com.cn/Article/CJFDTOTAL-HKJC200704002.htm

WAN M CH, LIAO G L, SHI T L. Research on the measurement of small optical element with aspheric surface[J]. Metrology & Measurement Technology, 2007, 27(4):1-4.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HKJC200704002.htm

[71]

ROKICKI R, HAIDER W, HRYNIEWICZ T. Influence of sodium hypochlorite treatment of electropolished and magnetoelectropolished nitinol surfaces on adhesion and proliferation of MC3T3 pre-osteoblast cells[J]. J. Materials Science Materials in Medicine, 2012, 23(9):2127-39. doi: 10.1007/s10856-012-4696-1

[72]

YOKAICHIYA M, FUNABASHI T, TAKAYA Y. The high precision measurement of the minute shape by the UA3P series[C]. JSPE Semestrial Meeting:The Japan Society for Precision Engineering, 2011:878-879.

[73]

吉住, 恵一. 超高精度三次元測定機UA3Pによる自由曲面の測定-自由曲面を10万分の1ミリメートル精度で測定[J]. Optical Alliance, 2008, 19: 32-37.

[74]

WEBER K, FENDL D, HEIN F, et al.. Sperm evaluation by 3D laser scanning microscopy(Olympus LEXT Ols4000)[J]. Toxicology Letters, 2013, 229(3):228-228.

[75]

潘永强, 吴振森, 杭凌侠, 等.多层介质薄膜膜层间界面粗糙度及光散射[J].红外与激光工程, 2009, 38(3):433-436. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ200903014.htm

PAN Y Q, WU ZH S, HANG L X, et al.. Interface roughness of multilayer dielectric optical thin film[J]. Infrared and Laser Engineering, 2009, 38(3):433-436.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ200903014.htm

[76]

ZHOU T, YAN J, LIANG Z, et al.. Development of polycrystalline Ni-P mold by heat treatment for glass microgroove forming[J]. Precision Engineering, 2014, 39:25-30. https://keio.pure.elsevier.com/ja/publications/development-of-polycrystalline-ni-p-mold-by-heat-treatment-for-gl

[77]

XIE J, ZHOU T, LIU Y, et al.. Mechanism study on microgroove forming by ultrasonic vibration assisted hot pressing[J]. Precision Engineering, 2016, 46:270-277. doi: 10.1016/j.precisioneng.2016.05.007

[78]

XIE J Q, ZHOU T F, LIU Y, et al.. The Effects of Ultrasonic Vibration in Hot Pressing for Microgrooves[C]. Materials Science Forum, 2016, 861:121-126.

[79]

李祥明, 邵金友, 丁玉成, 等.基于空间调制电场诱导去润湿的曲率可控微透镜阵列制造[J].中国科技论文在线, 2014. doi: 10.3969/j.issn.2095-2783.2014.01.016

LI X M, SHAO J Y, DING Y CH, et al.. Fabrication of microlens arrays with controlable curvature based on electrically induced dewetting by spatially modulcated electricfiled[J]. Sciencepaper Online, 2014.(in Chinese) doi: 10.3969/j.issn.2095-2783.2014.01.016

[80]

洪水金, 常洪龙, 寻文鹏, 等.基于PDMS薄膜的微透镜制作方法[J].微纳电子技术, 2014(4):257-261. http://www.cnki.com.cn/Article/CJFDTOTAL-BDTQ201404009.htm

HONG SH J, CHANG H L, XUN W P, et al.. A fabrication method for micro lens based on the PDMS menbrance[J]. Micronanoelectronic Technology, 2014(4):257-261.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-BDTQ201404009.htm

[81]

NAKAI J. Colored microlens array and manufacturing method for colored microlens array, color solid-state image capturing device and manufacturing method for color solid-state image capturing device, color display apparatus and manufacturing method for color display:US, 8274031 B2[P]. 2012-09-25

[82]

孙鸿达. 用于曲面复眼成像系统的啁啾微透镜阵列[D]. 厦门大学, 2014. http://cdmd.cnki.com.cn/Article/CDMD-10384-1014223200.htm

SUN H D. Chriped micro lens array for compound eye imaging system on curved surface[D]. Xiamen university, 2014.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10384-1014223200.htm

[83]

刘永华, 祖成奎, 赵华, 等.红外热成像系统用硫系玻璃的熔制技术[J].红外与激光工程, 2015, 42(5):1472-1476. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201505015.htm

LIU Y H, ZHAO CH K, ZHAO H, et al.. Melting technology of chalcogenide glass for infrared thermal imaging system[J]. Infrared and Laser Engineering, 2015, 42(5):1472-1476.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201505015.htm

[84]

戴世勋, 陈惠广, 李茂忠, 等.硫系玻璃及其在红外光学系统中的应用[J].红外与激光工程, 2012, 41(4):847-852. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201204003.htm

DAI SH X, CHEN H G, LI M ZH, et al.. Chalcogenide glasses and their infrared optical applications[J]. Infrared and Laser Engineering, 2012, 41(4):847-852.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201204003.htm

[85]

坚增运, 曾召, 董广志, 等.硫系红外玻璃的研究进展[J].西安工业大学学报, 2011, 31(1):1-8. http://youxian.cnki.com.cn/yxdetail.aspx?filename=ZGGA201710007&dbname=CJFDPREP

JIAN Z Y, ZENG ZH, DONG G ZH, et al.. Progress in the research of chalcogenide glasses for infrared transmission[J]. J. Xi'an Technological University, 2011, 31(1):1-8.(in Chinese) http://youxian.cnki.com.cn/yxdetail.aspx?filename=ZGGA201710007&dbname=CJFDPREP

[86]

LI J, WANG M, WANG, et al.. Preparation and optical properties of dispersible ZnS enanocrystals synthesized by high energy ball milling[J]. Ceramics International, 2008, 34(4):1077-1080. doi: 10.1016/j.ceramint.2007.09.042

[87]

PEJOVA B, GROZDANOV I. Three-dimensional confinement effects in semiconducting zinc selenide quantum dots deposited in thin-film form[J]. Materials Chemistry & Physics, 2005, 90(1):35-46.

[88]

CHANG S, HUANG B, CHEN X, et al.. Facile synthesis and characterization of water soluble ZnSe/ZnS quantum dots for cellar imaging[J]. Spectrochimica Acta Part A Molecular & Biomolecular Spectroscopy, 2013, 104C(3):143-149.

[89]

潘永强, 杭凌侠, 梁海锋, 等.硒化锌基底2~16μm超宽带硬质红外增透膜的研制[J].光学学报, 2010, 30(4):1201-1204. http://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201004063.htm

PAN Y Q, HANG L X, LIANG H F, et al.. Ultrabroad band and hard infrared antiflection coatings on ZnSe for 2~16μm[J]. Actaopticasinica, 2010.30(4):1201-1204.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201004063.htm

[90]

冯博. ZnSe纳米材料的制备及光学、光催化性能研究[D]. 北京: 中国科学院大学, 2013. http://cdmd.cnki.com.cn/Article/CDMD-80139-1013293630.htm

FENG B. Investigation on the synthesis optical and photocatalytic properties of ZnSe nanomaterials[D]. Beijing:Graduate University of Chinese Academy of Sciences, 2013.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-80139-1013293630.htm

[91]

黄毅, 陈永胜.石墨烯的功能化及其相关应用[J].中国科学, 2009, 30(4):887-896. http://www.cnki.com.cn/Article/CJFDTOTAL-JBXK200909004.htm

HUANG Y, CHEN Y SH. Functionalization of graphene and their applications[J]. Scichina, 2009(9):887-896.(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JBXK200909004.htm

[92]

徐秀娟, 秦金贵, 李振.石墨烯研究进展[J].化学进展, 2009(12):2559-2567. http://youxian.cnki.com.cn/yxdetail.aspx?filename=WLXB20171009002&dbname=CAPJ2015

XU X J, QIN J G, LI ZH. Research advances of graphene[J]. Progress in Chemistry, 2009(12):2559-2567.(in Chinese) http://youxian.cnki.com.cn/yxdetail.aspx?filename=WLXB20171009002&dbname=CAPJ2015

[93]

张永康. 石墨烯的制备及其摩擦学性能研究[D]. 南京理工大学, 2013. http://cdmd.cnki.com.cn/Article/CDMD-10288-1013166540.htm

ZHANG Y K. Research on graphene preparation and its tribological properties[D]. Nanjing University of Science & Technology, 2013.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10288-1013166540.htm

[94]

CHEN C S. Carbon nanotubes reinforced nickel-phosphorus base composite coating[J]. Acta Physica Sinica, 2004, 53(2):531-536.

[95]

ZHU Y, MURALI S, CAI W, et al.. Graphene and graphene oxide:synthesis, properties, and applications[J]. Advanced Materials, 2010, 22(35):3906-24. doi: 10.1002/adma.201001068