[1] 秦国华, 杨扬, 李强, 等.7075铝合金厚板多道次蛇形热轧的分析与预测[J].光学 精密工程, 2017, 25(4):437-446. http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201704020

QIN G H, YANG Y, LI Q, et al.. Analysis and prediction of muti-pass sanke hot rolling for 7075 aluminum alloy thick plate[J]. Opt. Precision Eng., 2017, 25(4):437-446.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201704020
[2] 柴伟伟, 陈清华, 李琳红, 等.大功率LED灯珠与散热器直焊结构散热效果分析[J].发光学报, 2011, 32(11):1171-1175. http://d.old.wanfangdata.com.cn/Periodical/fgxb201111015

CHAI W W, CHEN Q H, LI L H, et al.. Heat dissipation analysis of high power LED connected to copper coated heat sink by soldering[J]. Chinese Journal of Luminescence, 2011, 32(11):1171-1175.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/fgxb201111015
[3] BUCHWALDER A, DALKE A, SPIES H J, et al.. Studies of technological parameters influencing the nitriding behavior of spray-formed Al alloys[J]. Surface & Coatings Technology, 2014, 258(3):1259-1259. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=777e3bb7fe85620759d112d7cff9c846
[4] GUAN J, WANG J W, ZHANG D W. Nickel electroplating on copper pre-activated Al alloy in the electrolyte containing PEG(1000) as an additive[J]. Applied Physics a-Materials Science & Processing, 2018, 124(6):7-25. doi: 10.1007/s00339-018-1861-5
[5] 薛军, 冯建涛, 马长征, 等.激光冲击强化对激光增材TC4钛合金组织和抗氧化性的影响[J].中国光学, 2018, 11(2):198-205. http://www.chineseoptics.net.cn/CN/abstract/abstract9560.shtml

XUE J, FENG J T, MA CH ZH, et al.. Influence of laser shock peening on microstructure and oxidation resistance of laser additive manufactured TC4 titanium alloy[J]. Chinese Optics, 2018, 11(2):198-205.(in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9560.shtml
[6] 马琛, 马壮, 高丽红, 等.激光对鳞片石墨改性酚醛树脂涂层的损伤机理[J].中国光学, 2017, 10(2):249-255. http://www.chineseoptics.net.cn/CN/abstract/abstract9473.shtml

MA CH, MA ZH, GAO L H, et al.. Laer damage mechanism of flake graphite modified phenolic resin coating[J]. Chinese Optics, 2017, 10(2):249-255.(in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9473.shtml
[7] 刘洪喜, 李正学, 张晓伟, 等.热处理条件下激光原位合成高铌Ti-Al金属间化合物复合涂层的微结构特征[J].光学 精密工程, 2017, 25(6):1477-1485. http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201706011

LIU H X, LI ZH X, ZHANG X W, et al.. Microstructure characteristics of laser in situ synthesis high Niobium Ti-Al intermetallic compound coating under heat treatment[J]. Opt. Precision Eng., 2017, 25(6):1477-1485.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201706011
[8] 朱德亮, 陈吉星, 曹培林, 等.利用脉冲激光沉积法制备高Mg掺杂的六方相MgZnO薄膜[J].发光学报, 2010, 31(2):223-226. http://d.old.wanfangdata.com.cn/Periodical/fgxb201002015

ZHU D L, CHEN J X, CAO P L, et al.. Heavily Mg-depoded hexagonal phase thin ZnO films prepared by pulsed laser depositon[J]. Chinese Journal of Luminescence, 2010, 31(2):223-226.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/fgxb201002015
[9] 王成磊, 高原, 张光耀.CeO2对铝合金表面激光熔覆增材制造Ni60合金层组织及耐蚀性影响[J].稀有金属材料与工程, 2017, 46(8):2306-2312. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=xyjsclygc201708047

WANG CH L, GAO Y, ZHANG G Y. Effect of CeO2 addition on interface structure and corrosion resistance of laser cladding additive manufactured Ni60 alloy layers on the surface of Al alloys[J]. Rare Metal Materials and Engineering, 2017, 46(8):2306-2312.(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=xyjsclygc201708047
[10] HE L, TAN Y F, WANG X L, et al.. Tribological properties of laser cladding TiB2 particles reinforced Ni-base alloy composite coatings on aluminum alloy[J]. Rare Metals, 2015, 34(11):789-796. doi: 10.1007/s12598-014-0299-y
[11] TSAI M H, YEH J W. High-entropy alloys:a critical review[J]. Materials Research Letters, 2014, 2(3):107-123. doi: 10.1080/21663831.2014.912690
[12] SHU F Y, WU L, ZHAO H Y, et al.. Microstructure and high-temperature wear mechanism of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coating[J]. Materials Letters, 2018, 211(10):235-238. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=aed2f4b71b6c869339f5017ee9ed8339
[13] GUO Y X, LIU Q B, ZHOU F. Microstructure and properties of Fe5Cr5SiTiCoNbMoW coating by laser cladding[J]. Surface Engineering, 2018, 34(4):283-288. doi: 10.1080/02670844.2016.1213784
[14] MENG G H, LIN X, XIE H, et al.. Reinforcement and substrate interaction in laser surface forming of AlCoCrCuFeNi particle reinforced AZ91D matrix composites[J]. Journal of Alloys and Compounds, 2016, 672(10):660-667. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=670043617edb04d9a1aa527c553d627c
[15] SHON Y K, JOSHI S S, KATAKAM S, et al.. Laser additive synthesis of high entropy alloy coating on aluminum:corrosion behavior[J]. Materials Letters, 2015, 142(3):122-125. http://www.sciencedirect.com/science/article/pii/S0167577X14021648
[16] NI C, SHI Y, LIU J, et al.. Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding[J]. Optics and Laser Technology, 2018, 105(3):257-263.
[17] SHI Y, NI C, LIU J, et al.. Microstructure and properties of laser clad high-entropy alloy coating on aluminium[J]. Materials Science and Technology, 2018, 34(10):1239-1245. doi: 10.1080/02670836.2018.1444921
[18] KATAKAM S, JOSHI S S, MRIDHA S, et al.. Laser assisted high entropy alloy coating on aluminum:microstructural evolution[J]. Journal of Applied Physics, 2014, 116(10):6-25. https://www.researchgate.net/publication/265689497_Laser_assisted_high_entropy_alloy_coating_on_aluminum_Microstructural_evolution
[19] HUANG C, ZHANG Y Z, VILAR R, et al.. Dry sliding wear behavior of laser clad TiVCrAlSi high entropy alloy coatings on Ti-6Al-4V substrate[J]. Materials & Design, 2012, 41(3):338-343. http://www.sciencedirect.com/science/article/pii/S0261306912002920
[20] SINGH A K, SUBRAMANIAM A. On the formation of disordered solid solutions in multi-component alloys[J]. Journal of Alloys & Compounds, 2014, 587(7):113-119. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=c9c12db29f283acbe95ae60dcf55f2db
[21] ZHANG Y Z Y, LIN J P. Solid-solution phase formation rules for multi-component alloys[J]. Adv Eng Mater, 2008, 10(6):534-538. doi: 10.1002/(ISSN)1527-2648
[22] GUO S, NG C, LU J, et al.. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys[J]. Journal of Applied Physics, 2011, 109(10):103505. doi: 10.1063/1.3587228
[23] FANG S C, CHEN W P, FU Z Q. Microstructure and mechanical properties of twinned Al0.5CrFeNiCo0.3C0.2 high entropy alloy processed by mechanical alloying and spark plasma sintering[J]. Materials & Design, 2014, 54(7):973-979. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=e273b4170675f8a319c30cfdae75bdce
[24] GUO S, LIU C T. Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase[J]. Progress in Natural Science-Materials International, 2011, 21(6):433-446. doi: 10.1016/S1002-0071(12)60080-X
[25] SUN Y N, CHEN P, LIU L H, et al.. Local mechanical properties of AlxCoCrCuFeNi high entropy alloy characterized using nanoindentation[J]. Intermetallics, 2018, 93(5):85-88. http://www.sciencedirect.com/science/article/pii/S0966979517308245
[26] TAKEUCHI A, INOUE A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element[J]. Mater Trans, 2005, 46(12):2817-2829. doi: 10.2320/matertrans.46.2817
[27] ZHANG S, WU C L, ZHANG C H, et al.. Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance[J]. Opt. Laser Technol., 2016, 84(3):23-31. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=e461ddb463c40cb8b5544583ccdf645a
[28] 曹楚南.腐蚀电化学原理[M].北京:化学工业出版社, 2008.

CAO CH N. Principles of Electrochemistry Corrosion[M]. Beijing:Chemical Industry Press, 2006.(in Chinese)
[29] 王淼, 刘强, 张亚雄, 等.6061-T6铝合金多道搭接FSP腐蚀性能[J].材料研究学报, 2015, 29(8):589-594. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=clyjxb201508005

WANG M, LIU Q, ZHANG Y X, et al.. Corrosion property of Al-alloy 6061-T6 processed by multipass friction stir processing[J]. Chinese Journal of Materials Research, 2015, 29(8):589-594.(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=clyjxb201508005
[30] 范丽, 陈海龑, 董耀华, 等.激光熔覆铁基合金涂层在HCl溶液中的腐蚀行为[J].金属学报, 2018, 54(7):1019-1030. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jsxb201807007

FAN L, CHEN H H, DONG Y H, et al.. Corrosion behavior of Fe-based laser cladding coating in hydrochloric acid solutions[J]. Acta Metallurgica Sinica, 2018, 54(7):1019-1030.(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jsxb201807007
[31] PANDA B, BALASUBRAMANIAM R, DWIVEDI G. On the corrosion behaviour of novel high carbon rail steels in simulated cyclic wet-dry salt fog conditions[J]. Corrosion Science, 2008, 50(6):101-115. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=0b396044e134755604791db16588c117
[32] 曹楚南, 张鉴清.电化学阻抗谱导论[M].北京:科学出版社, 2002.

CAO C N, ZHANG J Q. An Introduction to Electrochemical Impedance Spectroscopy[M]. Beijing:Science Press, 2002.(in Chinese)