[1] 王忠善.天基大口径单体反射镜结构优化及其支撑技术研究[D]. 长春: 中国科学院长春光学精密机械与物理研究所, 2019.

WANG ZH SH. Research on structure optimization of large aperture monolithic space-based mirror and its mounting technology[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 2019. (in Chinese)
[2] 郭疆, 朱磊, 赵继, 等. 大口径空间反射镜大容差支撑结构设计与优化[J]. 光学 精密工程,2019,27(5):1138-1147. doi: 10.3788/OPE.20192705.1138

GUO J, ZHU L, ZHAO J, et al. Design and optimize of high tolerance support structure for large aperture space mirror[J]. Optics and Precision Engineering, 2019, 27(5): 1138-1147. (in Chinese) doi: 10.3788/OPE.20192705.1138
[3] 范磊. 2m级地基望远镜SiC主镜轻量化设计及支撑技术研究[D]. 长春: 中科院长春光学精密机械与物理研究所, 2013.

FAN L. Research on the lightweight design and support of the 2m-SiC primary mirror for ground-based telescope[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 2013. (in Chinese)
[4] YODER JR P R. Opto-Mechanical Systems Design[M]. 3rd ed. Boca Raton: CRC Press, 2005.
[5] 董得义, 庞新源, 张学军, 等. 空间大口径单体反射镜计量卸荷支撑研制中的关键技术[J]. 光学 精密工程,2019,27(10):2165-2179. doi: 10.3788/OPE.20192710.2165

DONG D Y, PANG X Y, ZHANG X J, et al. Key technology in developing of metrology mount for large aperture monolithic space-based mirror[J]. Optics and Precision Engineering, 2019, 27(10): 2165-2179. (in Chinese) doi: 10.3788/OPE.20192710.2165
[6] 胡企千. 望远镜技术与天文测天[M]. 南京: 东南大学出版社, 2014.

HU Q Q. Telescope Technology and Astrometry[M]. Nanjing: Southeast University Press, 2014. (in Chinese)
[7] TSAI L W. Robot Analysis: The Mechanics of Serial and Parallel Manipulators[M]. New York: Wiley, 1999.
[8] 王槐, 代霜. 大型望远镜轴系支撑结构的发展现状与分析[J]. 光机电信息,2011,28(3):17-27. doi: 10.3788/OMEI20112803.0017

WANG H, DAI SH. Development actuality and analysis of large alt-azimuth telescope shafting supporting structure[J]. OME Information, 2011, 28(3): 17-27. (in Chinese) doi: 10.3788/OMEI20112803.0017
[9] 王克军.天基大口径反射镜轻量化设计及复合支撑技术研究[D]. 长春: 中科院长春光学精密机械与物理研究所, 2016.

WANG K J. Research on the lightweight design and compound support of the large-aperture mirror for space-based telescope[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 2016. (in Chinese)
[10] 范磊, 张景旭, 邵亮, 等. 采用液压whiffle-tree的大口径主镜轴向支撑[J]. 红外与激光工程,2013,42(8):2126-2131. doi: 10.3969/j.issn.1007-2276.2013.08.035

FAN L, ZHANG J X, SHAO L, et al. Axial support for large aperture primary mirror based on hydraulic Whiffle-tree[J]. Infrared and Laser Engineering, 2013, 42(8): 2126-2131. (in Chinese) doi: 10.3969/j.issn.1007-2276.2013.08.035
[11] 李钰鹏, 王智, 沙巍, 等. Bipod反射镜支撑结构的柔度计算及分析[J]. 光学 精密工程,2018,26(7):1691-1697. doi: 10.3788/OPE.20182607.1691

LI Y P, WANG ZH, SHA W, et al. Flexibility calculation and analysis of Bipod reflector support structure[J]. Optics and Precision Engineering, 2018, 26(7): 1691-1697. (in Chinese) doi: 10.3788/OPE.20182607.1691
[12] 王富国, 乔兵, 张景旭. 2m SiC反射镜柔性被动支撑系统[J]. 光学 精密工程,2017,25(10):2591-2598. doi: 10.3788/OPE.20172510.2591

WANG F G, QIAO B, ZHANG J X. Flexible passive support system for 2 m SiC reflective mirror[J]. Optics and Precision Engineering, 2017, 25(10): 2591-2598. (in Chinese) doi: 10.3788/OPE.20172510.2591
[13] 胡海飞, 赵宏伟, 刘振宇, 等. 4 m口径SiC反射镜原位检测用静压支撑系统[J]. 光学 精密工程,2017,25(10):2607-2613. doi: 10.3788/OPE.20172510.2607

HU H F, ZHAO H W, LIU ZH Y, et al. Hydrostatic support system for in-situ optical testing of a 4 m aperture SiC mirror[J]. Optics and Precision Engineering, 2017, 25(10): 2607-2613. (in Chinese) doi: 10.3788/OPE.20172510.2607
[14] 田富湘, 何欣. 空间光学遥感器光学镜面有限元分析结果的后处理[J]. 红外,2014,35(9):19-22. doi: 10.3969/j.issn.1672-8785.2014.09.005

TIAN F X, HE X. Post−processing of FEA results of optical mirrors for space remote sensor[J]. Infrared, 2014, 35(9): 19-22. (in Chinese) doi: 10.3969/j.issn.1672-8785.2014.09.005
[15] 张军强, 董得义, 吴清文, 等. 光学遥感器镜面面形误差及刚体位移处理方法[J]. 仪器仪表学报,2011,32(6):242-247.

ZHANG J Q, DONG D Y, WU Q W, et al. Treatment of surface figure error and rigid body motion for mirror/lens in optical remote sensor[J]. Chinese Journal of Scientific Instrument, 2011, 32(6): 242-247. (in Chinese)
[16] 胡海飞, 罗霄, 辛宏伟, 等. 超大口径光学制造均力支撑布局优化[J]. 光学学报,2014,34(4):0422003. doi: 10.3788/AOS201434.0422003

HU H F, LUO X, XIN H W, et al. Layout optimization of equal-force supports for ultra-large optical fabrication[J]. Acta Optica Sinica, 2014, 34(4): 0422003. (in Chinese) doi: 10.3788/AOS201434.0422003