留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

非零位凸非球面子孔径拼接检测技术研究

闫公敬 张宪忠

闫公敬, 张宪忠. 非零位凸非球面子孔径拼接检测技术研究[J]. 中国光学(中英文), 2018, 11(5): 798-803. doi: 10.3788/CO.20181105.0798
引用本文: 闫公敬, 张宪忠. 非零位凸非球面子孔径拼接检测技术研究[J]. 中国光学(中英文), 2018, 11(5): 798-803. doi: 10.3788/CO.20181105.0798
YAN Gong-jing, ZHANG Xian-zhong. Research on non-null convex aspherical sub-aperture stitching detection technology[J]. Chinese Optics, 2018, 11(5): 798-803. doi: 10.3788/CO.20181105.0798
Citation: YAN Gong-jing, ZHANG Xian-zhong. Research on non-null convex aspherical sub-aperture stitching detection technology[J]. Chinese Optics, 2018, 11(5): 798-803. doi: 10.3788/CO.20181105.0798

非零位凸非球面子孔径拼接检测技术研究

doi: 10.3788/CO.20181105.0798
详细信息
    作者简介:

    闫公敬(1964-), 男, 黑龙江齐齐哈尔人, 副教授, 主要从事光学加工及检测技术方面的研究。E-mail:yan-gong-jing@163.com

  • 中图分类号: O439;O436.1

Research on non-null convex aspherical sub-aperture stitching detection technology

More Information
  • 摘要: 为了实现大口径凸非球面镜的高精度检测,本文研究了凸非球面非零位子孔径拼接检测技术,并建立了一套非零位拼接检测算法模型,模型中分别针对同轴子孔径与离轴子孔径非零位检测时所引入的测试误差进行了建模分析,同时对测试误差剔除、拼接系数求解、全口径面形获得等问题进行了研究。最后,结合工程实例,对一口径为130 mm的凸双曲面进行了拼接检测,分析了该非球面各测试子孔径非零位检测误差形式,同时进行了误差剔除、全口径面形获取等工作。从拼接结果中可以看出,拼接结果光滑、连续、无拼接痕迹。为了进一步验证拼接精度,我们将拼接结果与子孔径检测结果进行对比,引入了自检验子孔径评价方法,计算得到自检验子孔径与拼接结果在自检验子孔径范围内的残差图,二者残差图的PV值与RMS值分别为0.016λ与0.003λ,由上述结果可以得到自检验子孔径的测试结果与拼接结果在自检验子孔径范围内是一致的,从而验证了本文算法的拼接精度。

     

  • 图 1  子孔径拼接流程图

    Figure 1.  Flow chart of sub-aperture stitching testing

    图 2  同轴子孔径检测误差

    Figure 2.  Testing error of coaxial sub-aperture

    图 3  离轴子孔径检测误差

    Figure 3.  Testing error of off-axis sub-aperture

    图 4  检测装置图

    Figure 4.  Experimental setup

    图 5  子孔径规划示意图

    Figure 5.  Schematic diagram of sub-aperture arrangement

    图 6  子孔径检测结果

    Figure 6.  Test results of sub-apertures

    图 7  中心子孔径非零位检测误差

    Figure 7.  Non-null retrace error of central sub-aperture (pv 0.431λ rms 0.116λ)

    图 8  离轴子孔径非零位检测误差

    Figure 8.  Non-null retrace error of off-axis sub-aperture (pv 0.656λ rms 0.169λ)

    图 9  子孔径拼接结果

    Figure 9.  Stitching map of sub-aperture

    图 10  自检验子孔径检测结果

    Figure 10.  Testing map of self-examine sub-aperture

    图 11  残差图

    Figure 11.  Residual map

  • [1] ZHANG X J, ZHANG Z Y, LI Z L. Manufacturing and testing of 1-m class SiC aspherical mirror[J]. Proc. of SPIE, 2007, 6721:672109-5. doi: 10.1117/12.782696
    [2] MALACAL A. Optical Shop Testing[M]. New York:J.Wiley & Sons, 1992.
    [3] YANG H S, SONG J B, LEE I W, et al.. Testing of steep convex aspheric surface with a Hartmann sensor by using a CGH[J]. Opt. Express, 2006, 14(8):3247-3254. doi: 10.1364/OE.14.003247
    [4] AKIRA O, JAMES C W. Plotting errors measurement of CGH using an improved interferometric method[J]. Appl. Opt., 1984, 23(21):3905-3910. doi: 10.1364/AO.23.003905
    [5] GUO P J, YU J H. Design and certification of a null corrector to test hyperboloid convex mirror[J]. SPIE, 2006, 6150:259-263. http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=1323209
    [6] SU P, BURGE J H, PARKS R E. Application of maximum likelihood reconstruction of subaperture data for measurement of large flat mirrors[J]. Appl. Opt., 2010, 49:21-31. doi: 10.1364/AO.49.000021
    [7] MURPH Y P, FLEIG J, FORBES G, et al.. Subaperture stitching interferometry for testing mild aspheres[J]. Proc. of SPIE, 2006, 6293:62930J. http://spie.org/x648.html?product_id=680473
    [8] SUPRANOWITZ C, McFEE C, MURPHY P. Asphere metrology using variable optical null technology[J]. Proc. SPIE, 2012, 8416:841604-5. doi: 10.1117/12.2009289
    [9] CHEN S Y, LI S Y, DAI Y F, et al.. Experimental study on subaperture testing with iterative stitching algorithm[J]. Opt. Express, 2008, 16(7):4760-4765. doi: 10.1364/OE.16.004760
    [10] TIAN C, YANG Y Y, WEI T, et al.. Nonnull interferometer simulation for aspheric testing based on ray tracing[J]. Appl. Opt., 2011, 50(20):3559-3569. doi: 10.1364/AO.50.003559
    [11] HOU X, WU F, YANG L, et al.. Experimental study on measurement of aspheric surface shape with complementary annular subaperture interferometric method[J]. Opt. Express, 2007, 15(20):12890-12899. doi: 10.1364/OE.15.012890
    [12] 王孝坤.大口径离轴凸非球面系统拼接检测技术[J].中国光学, 2016, 9(1):130-136. http://www.chineseoptics.net.cn/CN/abstract/abstract9396.shtml

    WANG X K. Measurement of large off axis convex asphere by systemic stitching testing method[J]. Chinese Optics, 2016, 9(1):130-136.(in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9396.shtml
    [13] 郭福东, 唐锋, 卢云君, 等.子孔径拼接干涉的快速调整及测量[J].光学精密工程, 2017, 25(10):2683-2688. http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201710019

    GUO F D, TANG F, LU Y J, et al.. Rapid adjustment and measurement for subaperture stitching interferometry[J]. Opt. Precision Eng., 2017, 25(10):2683-2688.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201710019
    [14] 张磊, 刘东, 师途, 等.光学自由曲面面形检测技术[J].中国光学, 2017, 10(3), 283-299. http://www.chineseoptics.net.cn/CN/abstract/abstract9523.shtml

    ZHANG L, LIU D, SHI T, et al.. Optical free-form surfaces testing technologies[J]. Chinese Optics, 2017, 10(3), 283-299.(in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9523.shtml
    [15] 王孝坤.子孔径拼接干涉检测非球面技术的研究[D].长春: 中国科学院长春光学精密机械与物理研究所, 2008.

    WANG X K. Research on technique for testing of aspheric surfaces by subaperture stitching interferometry[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 2008.(in Chinese)
    [16] 闫力松, 王孝坤, 郑立功, 等.大口径反射镜子孔径拼接自检验精度分析[J].红外与激光工程, 2014, 43(6):1920-1924. doi: 10.3969/j.issn.1007-2276.2014.06.040

    YAN L S, WANG X K, ZHENG L G, et al.. Large-diameter reflector mirror stitching accuracy analysis based on self-test[J]. Infrared and Laser Engineering, 2014, 43(6):1920-1924.(in Chinese) doi: 10.3969/j.issn.1007-2276.2014.06.040
  • 加载中
图(11)
计量
  • 文章访问数:  2239
  • HTML全文浏览量:  813
  • PDF下载量:  223
  • 被引次数: 0
出版历程
  • 收稿日期:  2017-09-15
  • 修回日期:  2017-11-05
  • 刊出日期:  2018-10-01

目录

    /

    返回文章
    返回

    重要通知

    2024年2月16日科睿唯安通过Blog宣布,2024年将要发布的JCR2023中,229个自然科学和社会科学学科将SCI/SSCI和ESCI期刊一起进行排名!《中国光学(中英文)》作为ESCI期刊将与全球SCI期刊共同排名!