Calculation of lens parameters for lensmeters based on motor compensation

[1] 刘晨,张辉,柯玉军 .自动焦度计的研制[J]. 光学仪器 ,2003,25(6):40-44. LIU CH,ZHANG H,KE Y J. Development of automatic lensmeter[J]. Opt. Instruments,2003,25(6):40-44.(in Chinese) [2] 王文华,何斌,任建岳 . 线阵CCD成像系统自校图形设计[J]. 光学 精密工程 ,2009,17(8):2011-2015. WANG W H,HE B,REN J Y. Design of self-check figures in linear CCD imaging system[J]. Opt. Precision Eng.,2009,17(8):2011-2015.(in Chinese) [3] 刘志艳,陈香才,江晓山,等. 用于高速线阵CCD的数据获取系统[J]. 核电子学与探测技术 ,2010(6):722-725. LIU ZH Y,CHEN X C,JIANG X SH,et al.. A data-acquisition system for high speed linear CCD[J]. Nuclear Electronics Detection Technol.,2010(6):722-725.(in Chinese) [4] 徐正平,翟林培,葛文奇,等. 亚像元的CCD几何超分辨方法[J]. 光学 精密工程 ,2008,16(12):2447-2453 XU ZH P,ZHAI L P,GE W Q,et al.. CCD geometric super resolution method based on sub pixel[J]. Opt. Precision Eng.,2008,16(12):2447-2453.(in Chinese) [5] 李林 . 工程光学 [M].北京:北京理工大学出版社,2003. LI L. Engineering Optics[M]. Beijing:Beijing University of Technology Press,2003.(in Chinese) [6] 胡家升.光学工程导论 [M].大连:大连理工大学出版社,2002:835-846. HU J SH. Introduction to Optical Engineering[M]. Dalian:Dalian University of Technology Press,2002:835-846 (in Chinese). [7] 王和顺,陈次昌,黄惟公. 提高CCD测量精度的方法研究[J]. 光电子·激光 ,2010(1):63-65. WANG H SH,CHEN C CH,HUANG W G. Research the method to improve CCD measurement accuracy[J]. J.Optoelectronics·Laser,2010(1):63-65.(in Chinese) [8] 马振亚,王莉茹,刘文丽. GB 17341-1998中华人民共和国国家标准:光学和光学仪器-焦度仪[S]//全国光学和光学仪器标准化技术委员会.北京:中国标准出版社,1998:3-6. MA ZH Y,WANG L R,LIU W L. GB 17341-1998 National Standard of the People's Republic of China-Optics and Optical Instruments-Focimeters[S]//The national optical and optical instruments standardization technical committee. Beijing:China Standards Press,1998:3-6.(in Chinese) [9] 王莉茹,张吉焱,刘文丽,等. JJG580-2005中华人民共和国国家计量检定规程-焦度计[S]//全国光学计量技术委员会.北京:中国计量出版社,2005:4-6. WANG L R,ZHANG J Y,LIU W L,et al. JJG580-2005 The People's Republic of China National Metrological Verification Procedures:Focimeters[S]//The national optical measurement technology committee. Beijing:China Metrology Press,2995:4-6.(in Chinese)