Single point diamond machines and their applications to optical engineering

[1] DAVIES M A,EVANS C J,PATTERSON S R,et al.. Application of precision diamond machining to the manufacture of micro-photonics components[J]. SPIE,2003,5183:94-108. [2] EVANS C. Precision Engineering:An Evolutionary View[M]. Bedford:Cranfield Press,1989. [3] GIJSBERS T G. Some aspects of precision machine within Phlips[J]. SPIE,1984,508:26-30. [4] HORNE D F. Testing time for aspherics[J]. Precision Eng.,1981,3(2):59-59. [5] BENJAMIN R J. Diamond turning at a large optical manufacturer[J]. Opt. Eng.,1978,17(6):574-577. [6] 杨福兴. 非球面零件超精密加工技术[J]. 航空精密制造技术 ,1997,33(5):4-7. YANG F X. Ultra precision machining technology of aspheric parts[J]. Aviation Precision Manufacturing Thechnol.,1997,33(5):4-7.(in Chinese) [7] BRYAN J B. Design and construction of an 84 inch diamond turning machine[J]. Precision Eng.,1979,1(1):13-17. [8] MEINEL A B,MEINEL M P,STACEY J E,et al.. Wavefront correctors by diamond turning[J]. Appl. Opt.,1986,25(6):824-825. [9] LEADBEATER P B. A unique machine for grinding large off-axis optical components:the OAGM2500[J]. Precision Eng.,1989,11(4):191-196. [10] ZONG W J,LI Z Q,SUN T,et al.. The basic issues in design and fabrication of diamond-cutting tools for ultra-precision and nanometric madining[J]. International J. Madine Tools and Manufacture,2010,50(4):411-419. [11] 李圣怡,戴一帆. 超精密加工机床新进展[J]. 机械工程学报 ,2003,39(8):7-14. LI SH Y,DAI Y F. New development of the ultra precision machine tool[J]. Chinese J. Mechanical Eng.,2003,39(8):7-14.(in Chinese) [12] 罗松保,张建明. 非球面曲面光学零件超精密加工装备与技术[J]. 光学 精密工程 ,2003,1(1):75-78. LUO S B,ZHANG J M. Ultra precision machining equipment and technology of aspheric optics[J]. Opt. Precision Eng.,2003,1(1):75-78.(in Chinese) [13] KIM H S,KIM E J,SONG B S. Diamond turning of large off-axis aspheric mirrors using a fast tool servo with on-machine measurement[J]. J. Materials Processing Technol.,2004,146(3):349-355. [14] 康战,聂凤明,刘劲松,等. 单点金刚石精密数控车削加工技术及发展前景分析[J]. 光学技术 ,2010,36(2):163-167. KANG Z,NIE F M,LIU J S,et al.. Research on single point diamond precision numerical control turning technique and its development[J]. Opt. Technique,2010,36(2):163-167.(in Chinese) [15] ERICKSON D J,JOHNSTON R A,HULL A B. Optimization of the optomechanical interface employing diamond machining in a concurrent engineering environment[J]. SPIE,1992,CR43:329-363. [16] EDMUND W A. Diamond turning assisted fabrication of a high numerical aperture lens assembly for 157 nm microlithography[J]. SPIE,2003,5176:36-43. [17] YODER P R,Jr. Opto-Mechanical Systems Design[M]. Washington:SPIE Press:259-264.