Optimization design of external border for vehicle opto-electronic stabilized platform

[1] 魏颖,张波,李丽, 等 . 基于体系结构的软件可靠性评估[J]. 光学 精密工程 ,2010,18(2):485-490. WEI Y,ZHANG B,LI L,et al.. Architecture-based software reliability evaluation[J]. Opt. Precision Eng.,2010,18(2):485-490.(in Chinese) [2] 胡新宁,王厚生,王晖,等. 超导转子旋转驱动装置的设计[J]. 光学 精密工程 ,2010,18(1):169-174. HU X N,WANG H S,WANG H,et al.. Design of drive device for spinning superconducting rotors[J]. Opt. Precision Eng.,2010,18(1):169-174.(in Chinese) [3] 郑猛,冯其波,邵双运, 等 . CR扫描仪激光扫描光学系统的设计[J]. 光学 精密工程 ,2010,18(1):21-27. ZHENG M,FENG Q B,SHAO SH Y,et al.. Design of laser scanning optical systems for computed radiography[J]. Opt. Precision Eng.,2010,18(1):21-27.(in Chinese) [4] 李晓韬. 应用惯性冲击原理的非对称夹持式压电旋转驱动器的实验研究[J]. 光学 精密工程 ,2010,18(1):156-161. LI X T. Design of asymmetrical rotated piezoelectric actuators based on impact driving principle[J]. Opt. Precision Eng.,2010,18(1):156-161.(in Chinese) [5] 陈旭,刘伟奇,康玉思, 等 . 非球面补偿器的结构设计与装调[J]. 光学 精密工程 ,2010,18(1):88-93. CHEN X,LIU W Q,KANG Y S,et al.. Design and tolerance analysis of offner compensator[J]. Opt. Precision Eng.,2010,18(1):88-93.(in Chinese) [6] 李琳,杨勇. 空间曲线切口式柔性铰的设计[J]. 光学 精密工程 ,2010,18(10):2192-2198. LI L,YANG Y. Design of flexure hinges with space curve notches[J]. Opt. Precision Eng.,2010,18(10):2192-2198.(in Chinese) [7] 龚雨兵,杨世模,陈志远. 长缝光谱仪主结构的稳健优化设计[J]. 光学 精密工程 ,2009,17(11):2638-2645. GONG Y B,YANG SH M,CHEN ZH Y. Robust optimization design of primary structures of long slit spectrometers[J]. Opt. Precision Eng.,2009,17(11):2638-2645.(in Chinese) [8] 韩旭,马军,居波,等. 三线阵测绘相机热光学试验交会角测试系统[J]. 光学 精密工程 ,2009,17(12):2959-2965. HAN X,MA J,JU B,et al.. Measuring system of space intersection angle for three-line mapping camera in thermal-optical test[J]. Opt. Precision Eng.,2009,17(12):2959-2965.(in Chinese) [9] 韩旭,吴清文,董得义,等. 室温硫化胶层建模在透镜结构分析中的应用[J]. 光学 精密工程 ,2010,18(1):118-125. HAN X,WU Q W,DONG D Y,et al.. Application of RTV adhesive modeling to structure analysis of reflective mirror[J]. Opt. Precision Eng.,2010,18(1):118-125.(in Chinese) [10] 刘强,房建成,韩邦成,等. 磁悬浮飞轮锁紧装置及其优化设计[J]. 光学 精密工程 ,2010,18(8):1814-1821. LIU Q,FANG J CH,HAN B CH,et al.. Locking device for magnetic bearing flywheel and its optimization[J]. Opt. Precision Eng.,2010,18(8):1814-1821.(in Chinese) [11] 杨洪涛,贾继强. 机载光电平台内框架刚度及模态有限元分析[J]. 计算机仿真 ,2005,22(11):311-314. YANG H T,JIA J Q. Finite element modality and stiffness analysis of airborne electro-optical platform inner-ginbal[J]. Computer Simulation,2005,22(11):311-314.(in Chinese) [12] AWAD A N. Investigate the parameters effect on thermogravimetry analysis (TGA) performance for SOx additive in FCC units[J]. J. Environmental Sci. Eng.,2010,4(10):44-50.