Optimized design of high precision flexure-support barrel for reference sphere
-
摘要: 为了实现干涉仪标准镜中光学元件的高精度定位,设计了一种柔性支撑镜框,研究了该结构的力学模型、结构参数、定位精度和透镜变形。首先,根据材料力学原理将柔性镜框等效为一个弹簧系统;根据力学方程和几何关系,建立了透镜中心位置与柔性结构的挠度之间的二元方程。然后,分析了安装位置、温度、结构参数对透镜位置以及作用力的影响。最后,应用有限元仿真分析了所设计结构的力学性能,并进行对比验证。结果表明,数值仿真分析的结果与有限元仿真结果基本相同,柔性镜框的柔性结构厚度最优值为1.5 mm。该设计方案完全满足干涉仪标准镜对镜框在定位精度、稳定性方面的要求。Abstract: To achieve the positioning optical components of a reference sphere in a interferometer accurately, a flexure barrel was designed. The mechanical model, structure parameter, positioning accuracy and lens deformation of the structure was studied. Firstly, a spring model system was established based on the principle of material mechanics. According to the mechanical equation and geometry relations, a binary equation of the center position of lens and the flexure's deformation was given. Then, the effects of assemble position, temperature, and structure parameters on the the positions and force of the lens were analyzed. Finally, the mechanical performance of the designed structure was analyzed by using the FEA method. The results indicate that the results of numerical simulation is coincident with that of finite element simulation well, and the best thickness of the flexure barrel is 1.5 mm, which fully meet the requirements of the reference sphere in the interferometer for the positioning accuracy and stability of the lens barrel.
-
Key words:
- interferometr /
- reference sphere /
- flexure barrel /
- positioning accuracy /
- stability /
- finite element analysis
-
[1] 李琳,杨勇. 空间曲线切口式柔性铰链的设计[J]. 光学 精密工程 ,2010,18(10):2192-2198. LI L,YANG Y. Design of flexure hinges with space curve notches[J]. Opt. Precision Eng., 2010,18(10):2192-2198.(in Chinese) [2] 单云霄,陈长征,刘磊,等. 柔性铰链的有限元法设计与分析[J]. 中国光学与应用光学 ,2010,3(2):146-154. SHAN Y X,CHEN CH ZH,LIU L. design and analysis of flexure hinge by finite element method[J]. Chinese J. Opt.Appl. Opt.,2010,3(2):146-151.(in Chinese) [3] VUKOBRATOVICH D. Flexure mounts for high-resolution optical elements[J]. SPIE,1988,959:18-36. [4] VUKOBRATOVICH D,FETTERHOFF K A,MYERS J R,et al.. Bonded mounts for small cryogenic optics[J]. SPIE,2000,4131:228-239. [5] AHMAD A,HUSE R L. Mounting for high resolution projection lenses:US,4929054 . 1990-05-29. [6] CHRISTOPHER L. Athermal bonded mounts: Incorporating aspect ratio into a closed-form solution[J]. SPIE,2007,6665:666503. [7] HOSODA M,PARKS R E,BURGE J H. Vacuum support for a large interferometric reference surface . Tucson:University of Arizona,2010. [8] 秦鹏. 基于全柔性串接式振动系统的高精度动不平衡测量研究 . 上海:上海交通大学 ,2007. QIN P. Research on high accuracy dynamic unbalancing measurement based on fully compliant tandem vibration system . Shanghai:Shanghai Jiao Tong University,2007.(in Chinese) [9] 王忠素,翟岩,梅贵,等. 空间光学遥感器反射镜柔性支撑的设计[J]. 光学 精密工程 ,2010,18(8):1833-1841. WANG ZH S,ZHAI Y,MEI G,et al.. Design of flexible support structure of reflector in space remote sensor[J]. Opt. Precision Eng.,2010,18(8):1833-1841.(in Chinese) [10] 朱晓明,卢锷. 空间光学仪器结构件的动态特性分析及优化[J]. 光学 精密工程 ,1995,3(6):99-106. ZHU X M,LU E. Dynamical behaviors analysis and optimum design for space optical instrument[J]. Opt. Precision Eng.,1995,3(6):99-106.(in Chinese) -
计量
- 文章访问数: 4533
- HTML全文浏览量: 365
- PDF下载量: 1443
- 被引次数: 0
下载:
