标校经纬仪航向标定修正方法

李淼; 高慧斌

标校经纬仪航向标定修正方法

李淼^1,2,
高慧斌¹

1.
中国科学院长春光学精密机械与物理研究所, 吉林长春 130033;
2.
中国科学院研究生院, 北京 100039

详细信息

中图分类号: TP391.4; V556
计量
- 文章访问数: 3359
- HTML全文浏览量: 495
- PDF下载量: 1274
- 被引次数: 0
出版历程
- 收稿日期: 2011-09-08
- 修回日期: 2011-11-18
- 刊出日期: 2011-12-25

Correction method of heading calibration for calibration theodolite

LI Miao^1,2,
GAO Hui-bin¹

1.
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;
2.
Graduate University of Chinese Academy of Sciences,Beijing 100039,China

More Information

Author Bio:
GAO Hui-bin(1963-), male, born in Changchun, researcher, works at Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences. His main research interests are optical-electric measurement and optical-electric servo tracking control. E-mail:gaohuibin1@163.com

摘要

摘要: 为了准确有效地完成经纬仪航向标定,本文根据标校经纬仪坞内航向标校原理,分析了各单项误差对航向标定的影响,建立了照准差和定向误差同时影响下的航向标定修正模型,给出了具体的修正方法。实验及检测结果表明,用正倒镜法测得的定向误差数值等于定向误差与照准差的差值。文章验证了修正方法的正确性和有效性,规范了坞内航向标定方法,为测量船完成测量任务奠定了基础。
- 标校经纬仪 /
- 航向标定 /
- 单项误差 /
- 修正方法
Abstract: To precisely and effectively complete the heading calibration of a theodolite, this paper analyzes the effect of single error on the heading calibration, and builds a correct model of the heading calibration when the collimating and orientation errors are involved at the same time according to the heading calibration principle. It provides the specific correction and verification methods. Experimental and measurement results indicate that the orientation error measured by positive and inverse pointing methods is equivalent to the error between orientation error and collimating error. The research in this paper proves the feasibility and effectiveness of the correction method and disciplines the method of heading calibration at the dock, which will make sure TTC complete mission successfully.
- calibration theodolite /
- heading calibration /
- single error /
- correction method

HTML全文

参考文献(1)

[1] PAN L. The Position Measurement Technology for Space Instrument Ships[M]. Beijing:National Defence Industry Press,2009.(in Chinese) [2] JIAN S L. The Introduction of Maritime Tracking Technology for Space Instrument Ships[M]. Beijing:National Defence Industry Press,2009.(in Chinese) [3] Rules for the Implementation of Calibration for Space Instrument Ships at Dock[M].No.23 Base,2001.(in Chinese) [4] The Layout Calibration Scheme for Space Instrument Ships at Dock[M]. No.23 Base,2007.(in Chinese) [5] ZHANG S L. The Data Process Method for Space Instrument Ships[M]. Beijing:National Defence Industry Press,2009.(in Chinese) [6] WANG J Q. The Layout Design of the Optical Instruments[M]. Changchun:Changchun Institute of Optics Fine Mechanics and Physics,Chinese Academy of Sciences,2003.(in Chinese) [7] WANG J Q,ZHAO X Y,LI Y C. Optical Measuring in Shooting Range[M]. Beijing:Academy of Equipment Command & Technology,2001.(in Chinese) [8] WANG M,HU S L. Range Data Processing and Error Analysis[M]. Beijing:National Defence Industry Press,2008.(in Chinese) [9] HE Z C,HU G A. Optical Measurement System[M]. Beijing:National Defence Industry Press,2002.(in Chinese)

施引文献

附加信息(0)

访问统计