用于超低温环境的轻质反射镜制造技术

陈亚; 宋淑梅; 宣斌; 谢京江

用于超低温环境的轻质反射镜制造技术

中国科学院长春光学精密机械与物理研究所光学系统先进制造技术重点实验室,吉林长春 130033

详细信息

中图分类号: TP73; TH703
计量
- 文章访问数: 3847
- HTML全文浏览量: 352
- PDF下载量: 1842
- 被引次数: 0
出版历程
- 收稿日期: 2010-05-11
- 修回日期: 2010-07-19
- 刊出日期: 2010-10-25

Manufacturing technologies of lightweighted mirror applied to vacuum cryogenic environment

Key Laboratory of Optical System Advanced Manufacturing Technology,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033 China

摘要

摘要: 以椭圆形平面反射镜实例为研究对象,介绍了轻质反射镜材料的选择以及反射镜在真空超低温环境中的应用。分析了各种轻量化孔的特点,设计了一种反射镜结构;在吊带支撑方式下,建立整体结构的有限元模型,对由于镜体自重及超低温环境引起的镜面变形进行了有限元分析。由数控系统在图形方式下控制实际轻量化加工,加工后的反射镜轻量化率达到33%;采用化学方法消除加工过程中产生的应力与微小裂纹;运用环形抛光机结合局部修磨进行光学抛光加工,抛光后面形精度达到0.022(均方根,=633 nm);在实验室进行小范围温度拉偏实验,实验结果表明,面形精度变化量为0.03 nm。
- 轻质反射镜 /
- 超低温 /
- 轻量化 /
- 数控
Abstract: The design and manufacture of an elliptic mirror used in remote sensing was described in detail. How to choose the materials of a lightweighted mirror was discussed and the applications of the mirror to vacuum cryogenic environments were introduced. Based on the analyses of effects of different shapes of lightweighting holes, the structure of mirror was designed. By supporting the mirror with a belt hanging system, the gravity effect and the ultra low temperature effect were analyzed with a finite-element software. Furthermore, the practical lightweighting manufacture was carried out in the routing function of a computerized numerical control machining system, and the lightweighting ratio of elliptic mirror obtained has exceeded 33%. In order to eliminate the residual stress and microcracks introduced in the process, the mirror was disposed by a chemistry etching, and processed by a zone polishing machine on local. Results show that the surface error after polishing reaches 0.022(rms, =633 nm). The experiment of temperature variation was done in a small range and the change of surface error is 0.03 nm.
- lightweighted mirror /
- ultra-low temperature /
- lightweighting /
- computerized numerical control

HTML全文

参考文献(1)

[1] ZHANG Y M,ZHANG J H,HAN J C,et al.. Large-scale fabrication of lightweight Si/SiC ceramic composite optical mirror[J]. Mater. Lett.,2004,58:1204-1208. [2] 杨力.先进光学制造技术[M]. 北京:科学出版社,2001. YANG L. Advanced optical manufacture technology[M]. Beijing:Science Press,2001.(in Chinese) [3] LEE Y J,JOO H J. Ablation characteristics of carbon fiber reinforced carbon(CFRC)composites in the presence of silicon carbide(SIC)coating[J]. Surface and Coatings Technol.,2004,(180-181):286-289. [4] 刘宏伟,张芹,丁亚林,等. 基于有限元分析的长条状主镜支撑结构设计[J]. 光学精密工程 ,2003,11(6):556-558. LIU H W,ZHANG Q,DING Y L,et al. Design of strip primary mirror supporting structure based on finite element analysis[J]. Opt. Precision Eng.,2003,11(6):556-558.(in Chinese) [5] 吴清彬,陈时锦,董申. 参数优化方法在轻质反射镜结构设计中的应用[J]. 光学精密工程 ,2003,11(5):467-470. WU Q B,CHEN SH J,DONG SH. Optimization of parameters structural design of lightweight reflector[J]. Opt. Precision Eng.,2003,11(5):467-470.(in Chinese) [6] 闰勇,金光,杨洪波. 空间反射镜结构轻量化设计[J]. 红外与激光工程 ,2008,2(1):98-100. RUN Y,JING G,YANG H B. Lightweight structural design of space mirror[J]. Infrared and Laser Eng.,2008,2(1):98-100.(in Chinese) [7] MORIAN H F,MAUCH R. Zerodur for lightweight secondary/teriarymirrors[J]. SPIE,1998(3352):140-150. [8] 宋淑梅,陈亚,王延风,等. 计算机控制的轻质大型反射镜坯钻铣加工技术[J]. 光学技术 ,2001,27(6):549-555. SONG SH M,CHEN Y,WANG Y F,et al. Manufacturing of large lightweightted mirror substrate by CNC machining[J]. Opt. Technol.,2001,27(6):549-555.(in Chinese) [9] HAN S,NOVAK E,SCHURIG M. Application of Ritchey-Common test in large flat measurements[J]. SPIE,2001,4399:131-136.

施引文献

附加信息(0)

访问统计