光纤激光器光学膜设计与制备

梅禹珊; 付秀华; 杨永亮; 魏孜洵; 石澎

光纤激光器光学膜设计与制备

长春理工大学,吉林长春 130022

基金项目:

吉林省科技发展计划资助课题(No.20086012)

详细信息

作者简介:
梅禹珊(1986—),女,吉林长春人,硕士研究生,主要从事光学薄膜技术方面的研究。 E-mail:meiyushan5433@163.com 付秀华(1963—),女,山东滨州人,教授,主要从事光学薄膜技术及半导体激光器制造工艺方面的研究。 E-mail:goptics@126.com

梅禹珊(1986—),女,吉林长春人,硕士研究生,主要从事光学薄膜技术方面的研究。 E-mail:meiyushan5433@163.com 付秀华(1963—),女,山东滨州人,教授,主要从事光学薄膜技术及半导体激光器制造工艺方面的研究。 E-mail:goptics@126.com

中图分类号: O484.1; TN248.9
计量
- 文章访问数: 4463
- HTML全文浏览量: 512
- PDF下载量: 1531
- 被引次数: 0
出版历程
- 收稿日期: 2011-03-11
- 修回日期: 2011-05-19
- 刊出日期: 2011-06-25

Design and preparation of optical films for fiber lasers

Changchun University of Science and Technology,Changchun 130022,China

摘要

摘要: 针对激光在传输过程中的光能损失,本文根据光学薄膜理论,设计制备了减反射膜和抗激光的高反射膜,并对激光膜的镀膜材料、膜系设计、沉积工艺及离子辅助沉积等参数进行了深入研究。研究结果表明,制备的减反膜的反射率＜0.2%,激光以25~65入射时高反射膜的反射率＞99.7%。对50 m光纤和K9玻璃镀膜前后的输出功率测试显示多模光纤的功率平均提高了50%,而K9玻璃的反射功率提高到99.85%;另外,制备的光纤激光器光学膜有效地提高了激光损伤阈值,解决了低温冷镀的膜层牢固性问题。
- 真空镀膜 /
- 减反膜 /
- 高反膜 /
- 多模光纤
Abstract: For the energy loss of laser transmitting, an anti-reflection film and a high anti laser reflection film were designed and prepared according to the theory of optical thin film. Coating materials of laser films, coating design, deposition techniques and ion assisted deposition parameters were researched in detail. Results shows that the reflectance of the antireflectance coating is less than 0.2% and the average reflectance of the high reflectance film is higher than 99.7% when the laser incidence is 25~65. Furthermore, the experimental tests on 50 m optical fiber and K9 glass before and after coatings indicate that the average power of optical fiber has increased by 5% and the reflective power of the K9 glass has improve to 99.85%. Moreover, the preparation of optical films of the fiber laser effectively raises the laser damage threshold, and solves the problem of the film firmly under low temperature deposition.
- vacuum coating /
- antireflective coating /
- high reflective film /
- multi-mode fiber

HTML全文

参考文献(1)

[1] 李隆,董武威,史彭,等. 激光二极管阵列侧泵浦Nd∶ YAG板条的热效应[J]. 光学精密工程 ,2008,16(11):2120-2126. LI L,DONE W W,SHI P,et al..Thermal effect of diode bar side-pumped Nd∶ YAG slab[J]. Opt. Precision Eng.,2008,16(11):2120-2126.(in Chinese) [2] FAN ZH X,ZHAO Q,QIU H,et al.. Laser-induced damage in optical coatings and laser condition technology[J]. SPIE,1997,3244:469-474. [3] 卜轶坤,赵丽,郑权,等. 高损伤阈值激光反射镜的设计方法[J]. 红外与激光工程 ,2006,35(2):183-186. BU Y K,ZHAO L,ZHENG Q,et al.. Design method of high damage threshold laser mirror[J]. Infrared and Laser Eng.,2006,35(2):183-186.(in Chinese) [4] 付秀华,董连和,付新华,等 .红外增透与保护膜技术的研究[J]. 激光与红外 ,2006,36(12):1162-1164. FU X H,DONG L H,FU X H,et al.. Study of infrared AR and protecting coating technology[J]. Laser Infrared,2006,36(12):1162-1164.(in Chinese) [5] 钟迪生.真空镀膜—光学材料的选择与使用 [M].沈阳:辽宁大学出版社,2001. ZHONG D SH. The Selection and Use of Vacuum Coating-Optical Materials[M]. Shenyang:Liaoning University Press,2001.(in Chinese) [6] 唐晋发,顾培夫.现代光学薄膜技术 [M].杭州:浙江大学出版社,2006:103-114. TANG J F,GU P F. Modern Optical Thin Film Technology[M]. Hangzhou:Zhejiang University Press,2006:103-114.(in Chinese) [7] KAJIKAWA M T,KATAOKA I Z. A design method of optical band-pass filters[J]. J. Light Wave Technol.,1997,15(9):1720-1722. [8] MACLEOD H A. Optical thin film coating design[J]. SPIE,1996,2776:1-8. [9] PESQUE J J,BOUCHE D P,MITTRA R . Optimization of multilayer anti-reflection coatings using an optimal control method[J]. IEEE,1992,40(9):1789-1796. [10] 潘奕捷,林家明,商庆坤,等. 光学低通滤波器的频率特性和光谱特性[J]. 光学技术 ,2005,31(4):513-515. PAN Y J,LIN J M,SHANG Q K,et al.. Frequency and spectrum characteristic of the optical low passfilter[J]. Opt. Technique,2005,31(4):513-515.(in Chinese)

施引文献

附加信息(0)

访问统计