[1] 李琼花,杨家德. 非致冷凝视红外焦平面阵列的特点及应用[J]. 重庆工学院学报 ,2003,17(1):48-50. LI Q H,YANG J D. The characteristics and applications of uncooled staring infrared focal plain array[J]. J. Chongqing Institute Technol.,2003,17(1):48-50.(in Chinese)
[2] 孙恋君,张俊举,王世允,等. 非致冷微测辐射热计探测器工作温度特性研究[J]. 红外与毫米波学报 ,2007,26(3):232-236. SUN L J,ZHANG J J,WANG SH Y,et al.. Research on operating temperature characteristic of uncooled microbolometer detector[J]. J. Infrared Millim. Waves,2007,26(3):232-236.(in Chinese)
[3] 黄英东,安建波. 基于改进多项式拟合的红外焦平面非均匀性校正方法[J]. 红外 ,2011,32(3):29-33. HUANG Y D,AN J B. A nonuniformity correction algorithm for IRFPA based on improved polynomial fitting[J]. Infrared,2011,32(3):29-33.(in Chinese)
[4] DONG L Q,LIU X H,ZHAO Y J,et al.. Scene-based nonuniformity correction algorithm for MEMS-based un-cooled IR image system[J]. SPIE,2009,7419:74190Y.
[5] ROBERT M P,DANIEL T P. Radiometric calibration of a longwave FPA camera for IR scene[J]. SPIE,2006,6208:680818.
[6] WILLIAMS G M,BARTER A. Dual-band MWIR/LWIR radiometer for absolute temperature measurements[J]. SPIE,2006,6205:62050M.
[7] 陆子凤. 红外热像仪的辐射定标和测温误差分析 .长春:中国科学院长春光学精密机械与物理研究所,2010. LU Z F. Calibration and measurement error analysis of infrared imaging system for temperature measurement . Changchun:Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,2010.(in Chinese)
[8] 乐逢宁,蔡静,马兰,等. 使用红外热像仪应注意的问题[J]. 计测技术 ,2010,30(增):100-101. YUE F N,CAI J,MA L,et al.. The problem should be attended when using IR thermal imager[J]. Calculate,Measure Technology,2010,30(s):100-101.(in Chinese)
[9] 孙学金,刘剑,赵世军,等. 非致冷红外焦平面阵列的辐射定标模型[J]. 解放军理工大学学报 ,2008,9(4):399-403. SUN X J,LIU J,ZHAO SH J,et al.. Radiometric calibration model of uncooled infrared focal plane array[J]. J. PLA University of Science and Technology,2008,9(4):399-403.(in Chinese)
[10] 张云涛,李涛,高太长. 基于人工神经网络的红外焦平面阵列定标方法[J]. 气象水文海洋仪器 ,2009(4):19-22. ZHANG Y T,LI T,GAO T CH. Calibration method of infrared focal plane arrays based on neural network[J]. Meteorological, Hydrological and Marine Instruments,2009(4):19-22.(in Chinese)
|