高体分SiC<sub>p</sub>/Al复合材料螺纹性能的测试

刘炳强; 李景林; 王书新; 高明辉; 孙斌; 伞兵

高体分SiC_p/Al复合材料螺纹性能的测试

1.
中国科学院长春光学精密机械与物理研究所,吉林长春130033;
2.
中国科学院研究生院,北京100039

基金项目:

国家863高技术研究发展计划资助项目(No.863-2-5-1-13b)

详细信息

作者简介:
刘炳强(1986-),男,内蒙古扎兰屯人,硕士研究生,主要从事空间相机光机结构设计方面的研究。 E-mail:saiwaisuhang@yahoo.cn

中图分类号: V257; V243.5
计量
- 文章访问数: 3074
- HTML全文浏览量: 307
- PDF下载量: 1063
- 被引次数: 0
出版历程
- 收稿日期: 2011-09-11
- 修回日期: 2011-11-13
- 刊出日期: 2011-12-25

Characteristic test of threads on high volume fraction SiC_p/Al composites

1.
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China;
2.
Graduate University of Chinese Academy of Sciences, Beijing 100039, China

摘要

摘要: 从SiCp/Al复合材料性能分析着手,讨论了预置件法、焊接法和粘接法等在空间遥感器研制中常用的联接方法的优缺点,提出了在高体积分数(体分)SiCp/Al复合材料上直接加工螺纹,并加装钢丝螺套的方法来改善螺纹联接性能。对在某高体分SiCp/Al复合材料上加工的M4、M5螺纹进行了拉伸测试,结果表明:加装钢丝螺套前,复合材料螺纹有被拉脱现象;加装钢丝螺套后,M4螺纹、螺杆在3 000~4 000 N被拉断;M5螺纹、螺杆在8 000~9 000 N被拉断,测试后两种规格的螺纹状态良好,可以满足实际应用对该材料拉伸强度的要求,其已应用于工程项目中。
- 高体分SiCp/Al材料 /
- 复合材料-金属联接 /
- 复合材料螺纹 /
- 螺纹拉伸强度
Abstract: Based on analysis of properties of SiCp/Al composites, the advantages and disadvantages of common connecting methods for space optical sensors such as fore-imbedding, welding and bonding were demonstrated. A new method of machining threads directly on high volume fraction SiCp/Al composites and mounting steel wire thread sleeves to improve the thread connection was proposed. The tensile test for M4 and M5 threads on high volume fraction SiCp/Al composites were performed. Obtained results suggest that some of them are pulled out before mounting the steel wire thread sleeve. However, M4 and M5 screws are pulled off under 3 000-4 000 N and 8 000-9 000 N, respectively, after mounting the steel wire thread sleeve. The M4 and M5 threads show good shapes, which means that machining threads directly on high volume fraction SiCp/Al composites and mounting the steel wire can meet the requirements of the engineering for tensile strength and it is already used in some projects.
- high volume fraction SiCp/Al composite /
- composite-metal joining /
- thread on composite /
- tensile strength of thread

HTML全文

参考文献(1)

[1] 任建岳,陈长征,何斌. SiC和SiC/Al在TMA空间遥感器中的应用[J]. 光学精密工程 ,2008,16(12):2537-2542. REN J Y,CHEN CH ZH,HE B. Application of SiC and SiC/Al to TMA optical remote sensor[J]. Opt. Precision Eng.,2008,16(12):2537-2542.(in Chinese) [2] 张学军,李志来,张忠玉. 基于SiC材料的空间相机非球面反射镜结构设计[J]. 红外与激光工程 ,2007,36(5):577-582. ZHANG X J,LI ZH L,ZHANG ZH Y. Space telecope aspherica lmirror structure design based on SiC material[J]. Infrared and Laser Eng.,2007,36(5):577-582.(in Chinese) [3] 王永宪,王兵,任建岳. 空间相机碳纤维支撑结构改进及拓扑优化设计[J]. 红外与激光工程 ,2009,38(4):702-704. WANG Y X,WANG B,REN J Y. Topology optimization design for main supporting structure of space camera[J]. Infrared and Laser Eng.,2009,38(4):702-704.(in Chinese) [4] 崔岩. 碳化硅颗粒增强铝基复合材料的航空航天应用[J]. 材料工程 ,2002(6):3-6. CUI Y. Aerospace applications of silicon carbide particulate reinforced aluminium matrix composites[J]. J. Materials Eng.,2002(6):3-6.(in Chinese) [5] 顾晓峰. SiC_p/Al复合材料的制备及其器件的研制 . 武汉:武汉理工大学 ,2006. GU X F. Preparation of SIC_p/Al composites and electronic device fabrication . Wuhan:Wuhan University of Technology, 2006.(in Chinese) [6] 丁亚林,田海英,刘立国. 一种提高碳纤维复合材料框架结构应用性能的结构技术[J]. 光学精密工程 ,2003,11(3):287-290. DING Y L,TIAN H Y,LIU L G. Use of pre-embedded parts to improve the performance of carbon fibre framework[J]. Opt. Precision Eng.,2003,11(3):287-290.(in Chinese) [7] 田海英,关志军,丁亚林. 碳纤维复合材料应用于航天光学遥感器遮光镜筒[J]. 光学技术 ,2003,29(6):704-706. TIAN H Y,GUAN ZH J,DING Y L. Carbon fiber composite material used in space optical instrument[J]. Opt. Technique,2003,29(6):704-706.(in Chinese) [8] 董月玲,黄继华,闫久春,等. 碳化硅增强铝基复合材料联接技术研究进展[J]. 材料导报 ,2003,17(11):63-65. DONG Y L,HUANG J H,YAN J CH,et al. Progress in research on joining SiC reinforced aluminum metal matrix composites[J]. ,2003,17(11):63-65.(in Chinese) [9] 张洋,闫久春,陈晓光. SiC_p/A356复合材料超声波辅助钎焊[J]. 焊接学报 ,2009,30(3):89-92. ZHANG Y,YAN J CH,CHEN X G. Ultrasonically aided brazing of SiC_p/A356 composites[J]. Transactions China Welding Institution,2009,30(3):89-92.(in Chinese) [10] 李淑华,王建江,李树堂. 陶瓷与金属的联接[J]. 特种铸造及有色合金 ,2000(2):51-53. LI SH H,WANG J J,LI SH T. Joining of ceramic/metal[J]. Special Casting Nonferrous Alloys,2000(2):51-53.(in Chinese)

施引文献

附加信息(0)

访问统计